Bedienungsanleitung Black Decker kc 1036 k (Seite 7 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

381449

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

u Leave the tool connected to the charger for 3-6 hours.

The charger may hum and become warm while charging;

this is normal and does not indicate a problem.

Generally, a charging time of 3 hours will enable the tool to

operate at an effective power level for most tasks. However,

further charging for up to 6 hours could signicantly increase

the run time, depending on the battery and charging conditions.

u Before using the tool, unplug the charger and disconnect

the tool from the charger.

Warning! Do not use the tool while it is connected to the charger.

Adjustingthehandle(g.C)

For optimum versatility, the handle can be set to 3 different

positions.

u Press the handle adjustment button (2).

u Swivel the handle into the desired position. The button will

automatically lock itself into position.

Spindlelock(g.D)

This tool is tted with a collar (3) to lock the spindle. With the

spindle lock engaged, the tool can be used as a normal

screwdriver. Use the tool this way to loosen very tight screws

or to rmly tighten screws.

- To lock the spindle, turn the collar (3) counterclockwise.

- To unlock the spindle, turn the collar clockwise.

Screwdriving

For tightening screws, use forward (clockwise) rotation.

For loosening screws, use reverse (counterclockwise) rotation.

u To switch the tool on in forward rotation, press the upper

button on the forward/reverse switch (1).

u To switch the tool on in reverse rotation, press the lower

button on the forward/reverse switch (1).

u To switch the tool off, release the switch.

Hints for optimum use

u Always use the correct type and size of screwdriver bit.

u If screws are difcult to tighten, try applying a small

amount of washing liquid or soap as a lubricant.

u Use the spindle lock to loosen very tight screws or to

rmly tighten screws.

u Always hold the tool and screwdriver bit in a straight line

with the screw.

u When screwing in wood, it is recommended to drill a pilot

hole with a depth equal to the length of the screw. A pilot

hole guides the screw and prevents splintering or

distortion of the wood. For the optimum size of the pilot

hole, refer to the table below.

u When screwing in hardwood, also drill a clearance hole

with a depth equal to half the length of the screw. For the

optimum size of the clearance hole, refer to the table below.

Screw size Pilot hole ø Pilot hole ø Clearance

(softwood) (hardwood) hole

No. 6 (3.5 mm) 2.0 mm 2.5 mm 4 mm

No. 8 (4 mm) 3.2 mm 3.5 mm 5.0 mm

No. 10 (5 mm) 3.5 mm 4.0 mm 5.7 mm

UsingtheLED(g.D)

The LED (5) provides additional lighting in narrow and hard-to-

reach places.

u To switch on the LED, slide the switch (11) forward.

u To switch off the LED, slide the switch backward.

Warning! Do not use the LED as the only light source.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the

performance of your tool.

By using these accessories you will get the very best from

your tool.

This tool uses screwdriver bits with a 1/4" (6.35 mm)

hexagonal shank. Piranha Super-lok accessories are

designed for use with this tool.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

u Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker kc 1036 k Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info