Bedienungsanleitung Black Decker kc 36 (Seite 3 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

381281

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

Intended use

Your Black & Decker screwdriver has been designed for

inserting and removing screws and nuts using the appropriate

accessories. This tool is intended for consumer use only.

Your Black & Decker charger has been designed for charging

the battery in the tool with which it was supplied.

Safety instructions

◆ Warning! When using battery-powered tools, basic safety

precautions, including the following, should always be

followed to reduce the risk of fire, leaking batteries,

personal injury and material damage.

◆ Read all of this manual carefully before operating the tool.

◆ Retain this manual for future reference.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or

wet conditions. Keep the work area well lit. Do not use the

tool where there is a risk of causing fire or explosion, e.g. in

the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the

work area or to touch the tool.

Dress properly

Do not wear loose clothing or jewellery, as these can be

caught in moving parts. Preferably wear rubber gloves and

non-slip footwear when working outdoors. Wear protective

hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever

the operations may produce dust or flying particles.

Hearing protection should be worn.

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense. Do not

operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it

frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction

and collection facilities, ensure that these are connected and

properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed

from the tool before operating the tool.

Use appropriate tool

The intended use is described in this instruction manual.

Do not force small tools or attachments to do the job of a

heavy-duty tool. The tool will do the job better and safer at the

rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or

performance of any operation with this tool other than those

recommended in this instruction manual may present a risk of

personal injury.

Check for damaged parts

Before use, carefully check the tool for damage. Check for

misalignment and seizure of moving parts, breakage of parts,

damage to guards and switches and any other conditions that

may affect its operation. Ensure that the tool will operate

properly and perform its intended function. Do not use the tool

if any part is damaged or defective. Do not use the tool if the

switch does not turn it on and off. Have any damaged or

defective parts repaired or replaced by an authorised repair

agent. Never attempt any repairs yourself.

Remove the battery

Where the design permits, remove the battery when the tool

is not in use, before changing any parts of the tool,

accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch.

Be sure that the tool is switched off when inserting the

battery into the tool.

Do not abuse cord

Never carry the charger by its cord or pull it to disconnect from

the socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools, batteries and chargers should be stored

in a dry, locked up or high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow the instructions for maintenance and

changing accessories. Keep handles and switches dry, clean

and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using

original spare parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for batteries and chargers

Batteries

◆ Never attempt to open for any reason.

◆ Do not expose the battery to water.

◆ Do not store in locations where the temperature may

exceed 40 °C.

◆ Charge only at ambient temperatures between 4 °C and

40 °C.

◆ Charge only using the charger provided with the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker kc 36 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info