Bedienungsanleitung Black Decker KD455 RE (Seite 20 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

601842

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

SAFETY INSTRUCTIONS

Warning! When using electric tools, the following

basic safety precautions should always be taken to

reduce the risk of fire, electric shock and personal

injury. Read all these instructions before attempting to

operate the product and save this booklet.

For safe operation:

• Keep the work area clean. Cluttered areas and

benches invite injuries.

• Consider the work area environment. Do not expose

the power tool to rain and do not use in damp or wet

locations. Keep the work area well lit. Do not use

the power tool where there is a risk to cause fire

or explosion.

• Guard against electric shock. Avoid body contact,

where possible, with earthed or grounded surfaces

(e.g. pipes, radiators, ranges and refrigerators).

• Keep children away. Do not let visitors touch the

tool or extension cord. All visitors should be kept

away from the work area.

• Store idle tools. When not in use, tools should be

stored in a dry, high or locked place, out of reach

of children.

• Do not force the tool. It will do the job better and

more safely at the rate for which it was intended.

• Use the right tool. Do not force small tools or

attachments to do the job of a heavy duty tool.

Do not use the tool for purposes not intended; for

example, do not use a circular saw to cut tree

limbs or logs.

• Dress properly. Do not wear loose clothing or

jewellery as they can be caught in moving parts.

Rubber gloves and non-skid footwear are

recommended when working outdoors. Wear

protective hair covering to contain long hair.

• Use safety glasses. Use a face or dust mask as well,

if the operation is dusty or if the tool is being used in

enclosed spaces.

• Connecting dust extraction equipment. If devices

are provided for the connection of dust extraction

and collection ensure these are connected and

properly used, especially in confined areas.

• Do not abuse the cord. Never carry the tool by its

cord or yank it to disconnect it from the socket. Keep

the cord away from heat, oil and sharp edges.

• Secure the work. Use clamps or a vice to hold the

work. It is safer than using a hand and it frees both

hands to operate the tool.

• Do not overreach. Keep proper footing and balance at

all times.

• Maintain the tool with care. Keep a cutting tool

sharp and clean for better and safer performance.

Follow the instructions for lubricating and changing

accessories. Inspect the tools cord periodically and,

if damaged, have repaired by an authorised service

facility. Inspect the extension cord periodically and

replace if damaged. Keep the handles dry, clean and

free from oil and grease.

• Disconnect the tool when not in use, before

servicing and when changing accessories such as

blades, bits and cutters.

• Remove adjusting keys and wrenches. Form the

habit of checking to see that keys and adjusting

wrenches are removed from the tool and replaced in

the storage area before switching on.

• Avoid unintentional starting. Do not carry a

plugged-in tool with a finger on the switch.

Ensure the switch is off when plugging in.

• Use an outdoor extension cord. When a tool is used

outdoors, only use an extension cord intended for

outdoor use and so marked.

• Stay alert. Watch what you are doing, use common

sense and do not operate the tool when tired.

• Check damaged parts. Before further use of the tool,

a guard or other part that is damaged should be

carefully checked to determine whether it will

operate properly and perform its intended function.

Check for alignment of moving parts, free running of

moving parts, breakage of parts, mounting and any

other conditions that may affect its operation. A

guard or other part that is damaged should be

properly repaired or replaced by an authorised

service centre unless otherwise indicated in the

product booklet. Have defective switches replaced

by an authorised service centre. Do not use the tool

if the switch does not turn it on and off.

• Warning! The use of any accessory or attachment,

other than recommended in the product booklet,

may present a risk of personal injury.

• Have the tool repaired by a qualified person. The

electrical tool is in accordance with the relevant

safety requirements. Repairs should only be carried

out by qualified persons using original spare parts,

otherwise, this may result in considerable danger to

the user.

Save these instructions!

DOUBLE INSULATION

The tool is double insulated. This means that all

the external metal parts are electrically insulated

Corded drills user manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KD455 RE Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info