Bedienungsanleitung Black Decker kg 90 (Seite 20 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

390499

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

• Check mounting flanges and the disc are correctly

fitted and are undamaged.

• Ensure you are using the correct size and type of

disc for the task.

• Ensure the disc, wire brush and sanding

accessories are rated in excess of the spindle rpm

of your angle grinder. Allow a newly assembled

wheel to idle off-load for 30 seconds before starting

any operation.

Save these instructions!

DOUBLE INSULATION

Your tool is double insulated. This means that all

the external metal parts are electrically insulated

from the mains power supply. This is done by

placing insulation barriers between the

electrical and mechanical components making it

unnecessary for the tool to be earthed. Note:

Double insulation does not take the place of

normal safety precautions when operating this

tool. The insulation system is for added protection

against injury resulting from a possible electrical

insulation failure within the tool.

ELECTRICAL SAFETY

Be sure your supply is the same as the voltage given

on the rating plate. This tool is fitted with a two-core

cord and plug.

MAINS PLUG REPLACEMENT (UK ONLY)

Should the mains plug need replacing and you are

competent to do this, proceed as instructed below.

If you are in doubt, contact a Black & Decker service

repair agent or a qualified electrician.

• Disconnect the plug from the power supply.

• Cut off the plug and dispose of safely. A plug with

bared copper conductors is very dangerous if

engaged in a live socket outlet.

• Only fit BS1363A approved plugs fitted with the

correctly rated fuse. Note: Fuses do not give

personal protection against electric shock.

• The cable wire colours, or a letter, will be marked at

the connection point of most good quality plugs.

Attach the wires to their respective points in the

plug (see diagram). Brown = L (live), blue = N (neutral).

• Before replacing the top cover of the plug ensure

that the cable restraint is holding the outer sheath of

the cable firmly and that the two leads are correctly

fixed at the terminal screws.

• Your product is supplied with a non-rewireable plug,

if the fuse cover is missing or damaged do not use

the plug.

Fit a plug

approved

to BS1363A

Connect

blue to

N (neutral)

Make sure that

the outer sheath

of the cable is held

firmly by the clamp

Fit a 5 amp fuse

approved to

BS1362

Connect

brown to

L (live)

Never use

a light socket

Warning! Never connect live or neutral wires to the

earth pin marked E or .

Australia and New Zealand only

Should the mains pug or cordset of this equipment be

damaged it must only be replaced by an authorised

Black & Decker service agent as special purpose tools

are required.

EXTENSION CABLES

You can use up to 30m (100ft) of Black & Decker 2-core

extension cable (or 3-core extension cable in Australia

and New Zealand) without undue loss of power.

Note: An extension cable should not be used unless

absolutely necessary. Use of an improper extension

cable could result in a risk of fire and electric shock.

If an extension cable must be used, make sure it is

properly wired and in good electrical condition.

UNWANTED TOOLS AND THE ENVIRONMENT

Should you find one day that the tool needs

replacement or is of no further use, think of the

protection of the environment. Black & Decker

service agents will accept old tools and will

dispose of them in an environmentally safe way.

THE BLACK & DECKER GUARANTEE (UK, AUSTRALIA

AND NEW ZEALAND ONLY)

If your Black & Decker product becomes defective due

to faulty materials and workmanship, within 24 months

from the date of purchase, we guarantee to either

replace all defective parts or at our discretion, replace

the unit free of charge provided that:

• The product is returned to us or our authorised

repairers with evidence of date of purchase.

• The product has not been used for trade,

professional or hire purposes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker kg 90 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info