Bedienungsanleitung Black Decker KG2023 T5 (Seite 5 von 8) (Englisch)

578574

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for angle grinders

Read the instruction manual before use.

Wear safety glasses or goggles when operating this

tool.

Wear ear protection when operating this tool.

◆ Always use eye and ear protection when operating this

tool.

◆ Personal protective equipment such as dust mask, gloves,

helmet and apron should be worn.

◆ Do not cut or grind light metal with a magnesium content

exceeding 80%, since this type of metal is flammable.

◆ Only use grinding and cutting discs and other accessories

recommended in this manual.

◆ Make sure that the maximum speed of the grinding or

cutting disc exceeds the no-load speed of the tool.

◆ Do not use grinding and cutting discs that do not conform

to the dimensions stated in the technical data. Do not use

separate reducing bushings or adapters or make

unauthorised modifications to adapt large hole abrasive

wheels.

◆ Do not cut workpieces requiring a maximum depth of cut

exceeding that of the cutting disc.

◆ Do not use cutting discs for side grinding.

◆ Inspect grinding and cutting discs before each use. Do not

use chipped, cracked or otherwise defective discs.

◆ Ensure that the abrasive product is correctly mounted and

tightened before use and run the tool at no-load for 30 s

in a safe position, stop immediately if there is

considerable vibration or if other defects are detected. If

this condition occurs, check the machine to determine the

cause.

◆ Ensure that blotters are used when they are provided with

the bonded abrasive product and when they are required.

◆ When applying a threaded hole disc, ensure that the

thread is long enough to accept the spindle length.

◆ Never use the tool without the guard.

◆ Check that the workpiece is properly supported.

◆ Do not exert side pressure on the grinding or cutting disc.

◆ Ensure that sparks resulting from use do not create a

hazard e.g. do not hit persons, or ignite flammable

substances.

◆ Beware that after switching off the tool the wheel

continues to rotate for a short period.

◆ Ensure that ventilation slots are kept clear when working

in dusty conditions. If it should become necessary to clear

dust, first disconnect the tool from the mains supply.

Avoid damaging internal parts, use a soft brush or dry

cloth, do not use metallic objects.

◆ Abrasive wheels shall be stored and handled with care in

accordance with manufacturer’s instructions and always

store grinding and cutting discs in a dry place.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-off button

3. Side handle

4. Spindle lock

5. Guard

Assembly

Warning! Make sure that the tool is switched off and unplugged.

Fitting and removing the guard (fig. A)

Fitting

◆ Place the tool on a table, with the spindle (6) facing up.

◆ Hold the guard (5) over the tool as shown.

◆ Align the holes in the adjusting plate (7) with the screw

holes (8).

◆ Press the guard down and insert the screws (9) into the

holes.

◆ Tighten the screws.

Removing

◆ Remove the screws (9).

◆ Take the guard off the tool.

Warning! Never use the tool without the guard.

Adjusting the guard (fig. B)

The guard can be rotated 180°.

◆ Slacken the screws (9) and the nut (10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KG2023 T5 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KG2023 T5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info