Bedienungsanleitung Black Decker KG915 T3 (Seite 10 von 96) (Deutsch, Englisch, Französisch)

578204

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Fitting and removing sanding discs (ﬁ g.

E & F)

For sanding, a backing pad is required. The backing

pad is available from your Black & Decker dealer as

an accessory.

Fitting

 Place the inner ﬂ ange (10) onto the spindle (5) as

shown (ﬁ g. F). Make sure that the ﬂ ange is cor-

rectly located on the ﬂ at sides of the spindle.

 Place the backing pad (15) onto the spindle.

 Place the sanding disc (16) onto the backing

pad.

 Place the outer ﬂ ange (13) onto the spindle with

the raised centre facing away from the disc.

 Keep the spindle lock (3) depressed and

tighten the outer ﬂ ange using the two-pin span-

ner (14) (ﬁ g. E). Make sure that the outer ﬂ ange

is ﬁ tted correctly and that the disc is clamped

tightly.

Removing

 Keep the spindle lock (3) depressed and loosen

the outer ﬂ ange (13) using the two-pin spanner

(14) (ﬁ g. E).

 Remove the outer ﬂ ange (13), the sanding disc

(16) and the backing pad (15).

Residual risks

Additional residual risks may arise when using the

tool which may not be included in the enclosed

safety warnings. These risks can arise from misuse,

prolonged use etc. Even with the application of the

relevant safety regulations and the implementation

of safety devices, certain residual risks cannot be

avoided. These include:

 Injuries caused by touching any rotating/moving

parts.

 Injuries caused when changing any parts,

blades or accessories.

 Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods make sure

you take regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust devel-

oped when using your tool (example:- working

with wood, especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not

overload.

 Carefully guide the cable in order to avoid ac-

cidentally cutting it.

 Be prepared for a stream of sparks when the

grinding or cutting disc touches the workpiece.

 Always position the tool in such a way that the

guard provides optimum protection from the

grinding or cutting disc.

Switching on and off

 To switch on, slide the on/off switch (1) forward.

Note that the tool will continue running when you

release the switch.

 To switch off, press the rear part of the on/off

switch.

Warning! Do not switch the tool off while under

load.

Hints for optimum use

 Firmly hold the tool with one hand around the

side handle and the other hand around the main

handle.

 When grinding, always maintain an angle of approx.

15° between the disc and the workpiece surface.

Maintenance

Your Black & Decker tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on

corded/cordless power tools:

 Switch off and unplug the appliance/tool.

 Or switch off and remove the battery from the ap-

pliance/tool if the appliance/tool has a separate

battery pack.

 Or run the battery down completely if it is integral

and then switch off.

 Unplug the charger before cleaning it. Your

charger does not require any maintenance apart

from regular cleaning.

 Regularly clean the ventilation slots in your ap-

pliance/tool/charger using a soft brush or dry

cloth.

 Regularly clean the motor housing using a damp

cloth.

Do not use any abrasive or solvent-based cleaner.

 Regularly open the chuck and tap it to remove

any dust from the interior (when ﬁ tted).

Mains plug replacement (U.K. & Ireland

only)

If a new mains plug needs to be ﬁ tted:

 Safely dispose of the old plug.

 Connect the brown lead to the live terminal in

the new plug.

 Connect the blue lead to the neutral terminal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KG915 T3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KG915 T3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info