Bedienungsanleitung Black Decker KR502 (Seite 7 von 16) (Englisch)

16571

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Follow the instructions for maintenance and

changing accessories. Keep handles and

switches dry, clean and free from oil and grease.

20.Repairs

This tool complies with relevant safety

requirements. Repairs should only be carried

out by qualified persons using original spare

parts; otherwise this may result in considerable

danger to the user.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by

young or infirm persons without supervision.

Children must be supervised to ensure they do

not play with the appliance.

◆ If the supply cord is damaged, it must be

replaced by the manufacturer or an authorised

Black & Decker Service Centre in order to

avoid a hazard.

ELECTRICAL SAFETY

The electric motor has been designed for one

voltage only. Always check that the power supply

corresponds to the voltage on the rating plate.

This tool is double insulated in accordance

with EN 50144; therefore no earth wire is

required.

Mains plug replacement (U.K. & Ireland only)

◆ Should your mains plug need replacing and

you are competent to do this, proceed as

instructed below. If you are in doubt, contact an

authorised repair agent or a qualified electrician.

◆ Disconnect the plug from the supply and

remove the fuse from the plug.

◆ Cut off the plug and dispose of it safely; a plug

with bared copper conductors is dangerous if

engaged in a live socket outlet.

◆ Only fit 13 Amperes BS1363A approved plugs

fitted with the correctly rated fuse (1).

◆ The cable wire colours, or a letter, will be

marked at the connection points of most good

quality plugs. Attach the wires to their respective

points in the plug (see above). Brown is for

Live (L) (2), blue is for Neutral (N) (4).

◆ Before replacing the top cover of the mains

plug ensure that the cable restraint (3) is

holding the outer sheath of the cable firmly

and that the leads are correctly fixed at the

terminal screws.

◆ If the plug has a fuse cover, make sure that the

fuse cover is fitted. Do not use the plug if the

fuse cover is missing or damaged.

Never use a light socket.

Using an extension cable

Always use an approved extension cable suitable

for the power input of this tool (see technical data).

Before use, inspect the extension cable for signs

of damage, wear and ageing. Replace the extension

cable if damaged or defective. When using a cable

reel, always unwind the cable completely. Use of

an extension cable not suitable for the power

input of the tool or which is damaged or defective

may result in a risk of fire and electric shock.

OVERVIEW (fig. A)

This tool includes some or all of the following

features.

1. Variable speed switch

(AST1,CD501, KR450RE, KR500(C)RE, KR510)

1. On/off switch (other models)

2. Lock-on button

3. Two-speed selector (KR502, KR532)

3. Forward/reverse switch (other models)

4. Drilling mode selector

5. Side handle

6. Keyless chuck

7. Keyed chuck

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KR502 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KR502

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info