Bedienungsanleitung Black Decker KR50CRE (Seite 4 von 64) (Polnisch)

55651

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

d. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tools operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g. Use the power tool, accessories and

tool bits etc., in accordance with these

instructions and in the manner intended

for the particular type of power tool, taking

into account the working conditions and

the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a

qualiﬁ ed repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional safety instructions for impact drills

• Wear ear protectors with impact drills.

Exposure to noise can cause hearing loss.

• Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

• Hold power tool by insulated gripping

surfaces when performing an operation

where the cutting tool may contact hidden

wiring or its own cord. Contact with a “live”

wire will also make exposed metal parts of the

power tool “live” and shock the operator.

• Use clamps or another practical way to

secure and support the workpiece to

a stable platform. Holding the work by hand or

against your body leaves it unstable and may

lead to loss of control.

• Before drilling into walls, ﬂ oors or ceilings

check for the location of wiring and pipes.

• Avoid touching the tip of a drill bit just after

drilling, as it may be hot.

Electrical safety

This tool is double insulated; therefore

no earth wire is required. Always check

that the power supply corresponds to the

voltage on the rating plate.

• This appliance is not intended for use by young

or inﬁ rm persons without supervision. Children

must be supervised to ensure they do not play

with the appliance.

• If the supply cord is damaged, it must be

replaced by the manufacturer or an authorised

Black & Decker Service Centre in order to

avoid a hazard.

Features

This tool includes some or all of the following

features.

1. Variable speed switch

2. Lock-on button

3. Forward/reverse slider

4. Drilling mode selector

5. Chuck

6. Depth stop

7. Side handle

Assembly

Warning! Before assembly, make sure that the tool

is switched off and unplugged.

Fitting the side handle and depth stop (ﬁ g. A)

• Turn the grip counterclockwise until you can

slide the side handle (7) onto the front of the

tool as shown.

• Rotate the side handle into the desired

position.

• Insert the depth stop (6) into the mounting hole

as shown.

• Set the drilling depth as described below.

• Tighten the side handle by turning the grip

clockwise.

Fitting a drill bit or screwdriver bit

Keyless chuck (ﬁ g. B)

• Open the chuck by turning the front part (8)

with one hand while holding the rear part (9)

with the other.

• Insert the bit shaft (10) into the chuck and ﬁ rmly

tighten the chuck.

Keyed chuck (ﬁ g. C)

• Open the chuck by turning the sleeve (11)

counterclockwise.

• Insert the bit shaft (10) into the chuck.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KR50CRE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KR50CRE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info