Bedienungsanleitung Black Decker KR604CRES (Seite 7 von 72) (Deutsch, Englisch, Französisch, Türkisch)

462020

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

 If the supply cord is damaged, it must be re-

placed by the manufacturer or an authorised

Black & Decker Service Centre in order to avoid

a hazard.

Features

1. Variable speed switch

2. Lock-on button

3. Forward/reverse button

4. Drilling mode selector

5. Chuck

6. Depth stop (not all models)

7. Side handle (not all models)

ﬁ g. B

8. Manual spindle lock button (single sleeve key-

less chuck only)

Assembly

Warning! Before assembly, make sure that the tool

is switched off and unplugged.

Fitting the side handle and depth stop (ﬁ g. A)

 Turn the grip counter clockwise until you can

slide the side handle (7) onto the front of the

tool as shown.

 Rotate the side handle into the desired posi-

tion.

 Insert the depth stop (6) into the mounting hole

as shown.

 Set the drilling depth as described below.

 Tighten the side handle by turning the grip

clockwise.

Fitting a drill bit

Single sleeve keyless chuck (ﬁ g. B)

 Open the chuck by pressing the manual spindle

lock button (8) and turning the sleeve (9) counter

clockwise.

 Insert the bit shaft (12) into the chuck.

 Firmly tighten the chuck by pressing the manual

spindle lock button (8) and turning the sleeve

clockwise until it is tight.

Two sleeve keyless chuck (ﬁ g. C)

 Open the chuck by turning the sleeve (13) coun-

ter clockwise.

 Insert the bit shaft (12) into the chuck and ﬁ rmly

tighten the chuck.

Keyed chuck (ﬁ g. D)

 Open the chuck by turning the sleeve (11) coun-

ter clockwise.

 Insert the bit shaft (12) into the chuck.

 Insert the chuck key (14) into each hole (15) in

the side of the chuck and turn clockwise until

tight.

Removing and reﬁ tting the chuck (ﬁ g. E)

 Open the chuck as far as possible.

 Remove the chuck retaining screw, located

in the chuck, by turning it clockwise using

a screwdriver.

 Tighten an Allen key into the chuck and strike it

with a hammer as shown.

 Remove the Allen key.

 Remove the chuck by turning it counter clock-

wise.

 To reﬁ t the chuck, screw it onto the spindle and

secure it with the chuck retaining screw.

Residual risks

Additional residual risks may arise when using the

tool which may not be included in the enclosed

safety warnings. These risks can arise from misuse,

prolonged use etc.

Even with the application of the relevant safety

regulations and the implementation of safety de-

vices, certain residual risks cannot be avoided.

These include:

 Injuries caused by touching any rotating/moving

parts.

 Injuries caused when changing any parts,

blades or accessories.

 Injuries caused by prolonged use of a tool. When

using any tool for prolonged periods make sure

you take regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust devel-

oper when using your tool (example:- working

with wood, especially oak, beech and MDF).

Use

Warning! Let the tool work at its own pace. Do not

overload.

Warning! Before drilling into walls, ﬂ oors or ceilings,

check for the location of wiring and pipes.

Selecting the direction of rotation (ﬁ g. F)

For drilling and for tightening screws, use forward

(clockwise) rotation. For loosening screws or re-

moving a jammed drill bit, use reverse (counter

clockwise) rotation.

 To select forward rotation, push the forward/re-

verse button (3) to the left position.

 To select reverse rotation, push the forward/re-

verse button to the right.

Warning! Never change the direction of rotation

while the motor is running.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KR604CRES Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info