Bedienungsanleitung Black Decker ks 480 kk (Seite 4 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

383467

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for jigsaws

◆ Warning! Contact with or inhalation of dusts arising

from cutting applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Dust shroud

5. Blade support roller

6. Shoe plate

7. Pendulum stroke selector

8. Dust extraction opening

9. Allen key

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

that the saw blade has stopped.

Fitting the saw blade (fig. A)

◆ Remove the dust shroud (4).

◆ Loosen the screw (10) using the Allen key provided.

◆ Hold the saw blade (11) as shown, with the teeth facing

forward.

◆ Insert the shank of the saw blade into the blade holder (12)

as far as it will go.

◆ Tighten the screw (10).

Connecting a vacuum cleaner to the tool (fig. B)

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool. The adaptor

can be purchased from your local Black & Decker retailer.

◆ Push the adaptor (14) into the opening (8).

◆ Connect the vacuum cleaner hose (15) to the adaptor.

◆ Make sure that the dust shroud (4) is fitted.

Use

Warning! Let the tool work at its own pace. Do not overload.

Adjusting the shoe plate for bevel cuts (fig. C)

The shoe plate can be set to a left or right bevel angle of up to

45°.

◆ Loosen the screws (13).

◆ Pull the shoe plate (6) forward, set it to the required angle

and push it back into place. You can use the scale or a

protractor to check the angle.

◆ Make sure that the blade support roller is adjusted correctly.

◆ Tighten the screws (13).

To reset the shoe plate for straight cuts:

◆ Loosen the screws (13).

◆ Pull the shoe plate forward and set it to an angle of

approx. 0°.

◆ Make sure that the blade support roller is adjusted correctly.

◆ Push the shoe plate backward and tighten the screws (13).

◆ Use a square to check the angle.

Setting the pendulum stroke

◆ Set the pendulum stroke selector (7) to the desired position.

- Position 0: for laminates and sheet metal

- Position 1: for plywood, metal and aluminium

- Position 2: for soft wood and pvc

Variable speed control

◆ Set the variable speed control knob (3) to the required

speed range. Use a high speed for wood, medium speed

for aluminium and PVC and low speed for metals other

than aluminium.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch.

To switch the tool off when in continuous operation,

press the on/off switch once more and release it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ks 480 kk Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info