Bedienungsanleitung Black Decker ks 888 ek (Seite 6 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

382800

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of

the operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-on button

3. Saw blade locking lever

4. Saw blade support roller

5. Saw blade

6. Shoe plate

7. Shoe plate locking knob

8. Saw blade storage compartment

9. Dust extraction adaptor

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingthesawblade(g.A)

u Hold the saw blade (5) as shown, with the teeth facing

forward.

u Push the lever (3) downwards.

u Insert the shank of the saw blade into the blade holder (10)

as far as it will go.

u Release the lever.

u Adjust the blade support roller as described below.

Adjustingthebladesupportroller(g.B)

After tting the blade, you need to adjust the blade support

roller (4).

u Turn the locking knob (7) in direction A.

u Slide the blade support roller against the rear of the blade.

The blade must locate in the central recess of the roller.

u Turn the locking knob (7) in direction B to lock the shoe

plate in place.

Connectingavacuumcleanertothetool(g.C&D)

u Align the dust extraction adaptor (9) with the saw shoe as

shown.

u Insert the ribs (12) into the slots (13).

u Rotate the adaptor until it locks into position. Make sure

that the ribs (14) are correctly seated.

u Connect the vacuum cleaner hose (11) (not supplied) to

the adaptor.

Dust extraction is not possible when making bevel cuts.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Never use the tool when the saw shoe is loose or

removed.

Adjustingtheshoeplateforbevelcuts(g.E)

The shoe plate can be set to a left or right bevel angle of up to

45°.

u Turn the locking knob (7) in direction A to release the shoe

plate (6).

u Pull the shoe plate (6) backwards and set it to the required

angle. You can use the scale or a protractor to check the

angle.

u Turn the locking knob (7) in direction B to lock the shoe

plate in place.

To reset the shoe plate for straight cuts:

u Turn the locking knob (7) in direction A to release the shoe

plate (6).

u Pull the shoe plate backwards and set it to an angle of

approx. 0°.

u Push the shoe plate forward.

u Turn the locking knob (7) in direction B to lock the shoe

plate in place. Make sure that the shoe plate is supported

by the guide ribs.

Switching on and off

u To switch the tool on, press the variable speed switch (1).

The tool speed depends on how far you press the switch.

u For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option is available

only at full speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ks 888 ek Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info