Bedienungsanleitung Black Decker ks 990 ek (Seite 5 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

382454

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for hand-held saws

◆ Always use the appropriate type of saw blade for the

workpiece material and type of cut.

◆ Only use saw blades in perfect condition.

◆ Always switch the tool off and wait for the saw blade to

come to a complete standstill before putting the tool down.

◆ Keep your hands well clear of the saw blade while working.

◆ Whenever possible, use clamps or a vice to secure the

workpiece.

◆ Do not use the tool while in a tree, on a ladder or on any

other unstable surface.

◆ When cutting branches be aware of where the branch will

fall.

Hearing protection should be worn when using this

tool.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-off button

3. Speed control wheel

4. Blade holder

5. Blade changing button

6. Shoe

7. Shoe locking button

In addition, this tool is supplied with some or all of the

following accessories (fig. A):

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

that the saw blade has stopped.

Fitting the saw blade (fig. B)

◆ Hold the saw blade securely. If the saw blade is fitted

with a tooth protector, leave it attached while fitting the

blade.

◆ Depress the blade changing button (5).

◆ Insert the shank of the saw blade into the blade holder (4)

as far as it will go.

◆ Release the blade changing button.

◆ Remove the tooth protector, if fitted.

Note: This tool has been designed to allow the saw blades to

be fitted with the teeth facing forward or backward.

Removing and fitting the shoe (fig. C)

The shoe can be removed for cleaning the tool or for fitting the

circle and edge guide.

◆ Hold the tool as shown.

◆ Depress the shoe locking button (7) and slide the shoe (6)

away from the tool.

◆ Release the shoe locking button.

To fit the shoe:

◆ Depress the shoe locking button and slide the shoe into

the slots.

◆ Release the shoe locking button and make sure that the

shoe is securely attached to the tool.

Fitting the circle cutter / edge guide (fig. B, C, D & E)

◆ Remove the saw blade from the blade holder (4).

◆ Remove the shoe (6).

Accessory Recommended application and use Sawblade orientatien

8. 24 tpi recip blade Cutting metal Teeth facing back

9. 6 tpi curved teeth Fast cutting of wood and plastic Teeth facing back

10. 6 tpi straight teeth Dry wall (plaster board) Teeth facing back

11. Ground set recip blade Pruning Teeth facing back

12. Circle cutter / edge guide

13. 18 tpi wavy, milled blade Cutting metal Teeth facing forward

14. 6 tpi set, milled blade Fast cutting of wood Teeth facing forward

15. 10 tpi set, milled blade Cutting plastic Teeth facing forward

16. 10 tpi scroll, milled set Scroll cutting Teeth facing forward

Note: tpi = teeth per inch

Warning! When using the dry wall blade to cut into walls or ceilings, make sure to check for the location of wiring and pipes

near the cutting area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ks 990 ek Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info