Bedienungsanleitung Black Decker ks 999 ek turbo (Seite 4 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

383514

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Turbo selector

5. Saw blade locking lever

6. Saw blade support roller

7. Saw blade

8. Shoe plate

9. Shoe plate locking knob

10. Saw blade storage compartment

11. Dust extraction adaptor

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

that the saw blade has stopped. Used saw blades can be hot.

Fitting the saw blade (fig. A)

◆ Hold the saw blade (7) as shown, with the teeth facing

forward.

◆ Push the lever (5) downwards.

◆ Insert the shank of the saw blade into the blade holder (12)

as far as it will go.

◆ Release the lever.

Connecting a vacuum cleaner to the tool (fig. B & C)

◆ Align the dust extraction adaptor (11) with the saw shoe

as shown.

◆ Insert the ribs (14) into the slots (15).

◆ Rotate the adaptor until it locks into position. Make sure

that the ribs (16) are correctly seated.

◆ Connect the vacuum cleaner hose (13) (not supplied) to

the adaptor.

Dust extraction is not possible when making bevel cuts.

Use

Warning! Never use the tool when the saw shoe is loose or

removed.

Adjusting the shoe plate for bevel cuts (fig. D)

The shoe plate can be set to a left or right bevel angle of up to

45°.

◆ Turn the locking knob (9) in direction A to release the shoe

plate (8).

◆ Pull the shoe plate (8) backwards and set it to the

required angle. You can use the scale or a protractor to

check the angle.

◆ Turn the locking knob (9) in direction B to lock the shoe

plate in place.

To reset the shoe plate for straight cuts:

◆ Turn the locking knob (9) in direction A to release the shoe

plate (8).

◆ Pull the shoe plate backwards and set it to an angle of

approx. 0°.

◆ Push the shoe plate forward.

◆ Turn the locking knob (9) in direction B to lock the shoe

plate in place. Make sure that the shoe plate is supported

by the guide ribs.

Variable speed control

◆ Set the variable speed control knob (3) to the required

speed range. Use a high speed for wood, medium speed

for aluminium and PVC and low speed for metals other

than aluminium.

Turbo selector

◆ For fast and efficient straight cuts in wood, set the turbo

selector (4) to “max”.

◆ For accurate straight and curve cutting and a smooth

surface finish, set the turbo selector (4) to “min”.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch.

To switch the tool off when in continuous operation, press

the on/off switch once more and release it.

How to use the SightLine‡ feature (fig. E)

◆ Use a pencil to mark the cutting line.

◆ Position the jigsaw over the line (17).

Viewing from directly above the jigsaw the line of cut can be

easily followed. Should this view be restricted for any reason,

the indent (18) can be used as an alternate cutting guide.

Hints for optimum use

Sawing laminates

As the saw blade cuts on the upward stroke, splintering may

occur on the surface closest to the shoe plate.

◆ Use a fine-tooth saw blade.

◆ Saw from the back surface of the workpiece.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ks 999 ek turbo Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info