Bedienungsanleitung Black Decker KS2005EK T1 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

580870

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Mode selector switch

5. Saw blade locking lever

6. Saw blade holder

7. Shoe plate

8. Shoe plate locking knob

9. Scroll knob

10. Saw blade storage compartment

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingthesawblade(g.A)

u Hold the saw blade (11) as shown, with the teeth facing

forward.

u Push the lever (5) downwards.

u Insert the shank of the saw blade into the blade holder (6)

as far as it will go.

u Release the lever.

u Adjust the blade support roller as described below.

Adjustingthebladesupportroller(g.A&B)

After tting the blade, you need to adjust the blade support

roller (12).

u Turn the blade support adjustment screw (13) in the

counterclockwise direction.

u Slide the blade support roller against the rear of the blade.

The blade must locate in the central recess of the roller.

u Turn the blade support adjustment screw in the clockwise

direction to lock the blade support in place.

Connectingavacuumcleanertothetool(g.C&D)

u Align the dust extraction adaptor (14) with the saw shoe

as shown.

u Insert the ribs (15) into the slots (16).

u Push the adaptor backwards to lock it in position.

u Connect the vacuum cleaner hose (17) (not supplied) to

the adaptor.

Dust extraction is not possible when making bevel cuts.

Warning! Do not use the dust extraction adaptor when sawing

metal.

Use

Warning! Let the tool work at its own pace. Do not overload.

Warning! Never use the tool when the saw shoe is loose or

removed.

Adjustingtheshoeplateforbevelcuts(g.E)

The shoe plate can be set to a left or right bevel angle of up to

45°.

u Turn the locking knob (8) in direction A to release the shoe

plate (7).

u Pull the shoe plate (7) backwards and set it to the required

angle. You can use the scale or a protractor to check the

angle.

u Turn the locking knob (8) in direction B to lock the shoe

plate in place.

To reset the shoe plate for straight cuts:

u Turn the locking knob (8) in direction A to release the shoe

plate (7).

u Pull the shoe plate backwards and set it to an angle of

approx. 0°.

u Push the shoe plate forward.

u Turn the locking knob (8) in direction B to lock the shoe

plate in place. Make sure that the shoe plate is supported

by the guide ribs.

Settingtheoperatingmode(g.F)

In the straight cutting mode, the saw blade can be set and

locked in 4 positions: forward, reverse, left or right.

u Turn the mode selector switch (4) to position A

(scrolling mode).

u Rotate the saw blade into the required direction using the

scroll knob (9).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS2005EK T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS2005EK T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info