Bedienungsanleitung Black Decker KS600E T1 (Seite 6 von 76) (Polnisch, Türkisch)

580885

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ENGLISH

power tool will do the job better and safer at

the rate for which it was designed.

b. Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e. Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tools operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g. Use the power tool, accessories and

tool bits etc., in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

5. Service

a. Have your power tool serviced by

a qualiﬁ ed repair person using only

identical replacement parts. This will ensure

that the safety of the power tool is maintained.

Additional power tool safety warnings

Warning! Additional safety warnings for

jigsaws and reciprocating saws

♦ Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live”

and could give the operator an electric shock.

♦ Use clamps or another practical way to

secure and support the workpiece to

a stable platform. Holding the work by hand

or against your body leaves it unstable and

may lead to loss of control.

♦ Keep hands away from cutting area. Never

reach underneath the work piece for any

reason. Do not insert ﬁ ngers or thumb into the

vicinity of the reciprocating blade and blade

clamp. Do not stabilize the saw by gripping the

shoe.

♦ Keep blades sharp. Dull or damaged blades

may cause the saw to swerve or stall under

pressure. Always use the appropriate type of

saw blade for the workpiece material and type

of cut.

♦ When cutting pipe or conduit, make sure that

they are free from water, electrical wiring, etc.

♦ Do not touch the workpiece or the blade

immediately after operating the tool. They can

become very hot.

♦ Be aware of hidden hazards, before cutting

into walls, ﬂ oors or ceilings, check for the

location of wiring and pipes.

♦ The blade will continue to move after releasing

the switch. Always switch the tool off and

wait for the saw blade to come to a complete

standstill before putting the tool down.

Warning! Contact with, or inhalation of dusts

arising from cutting applications may endanger the

health of the operator and possible bystanders.

Wear a dust mask speciﬁ cally designed for

protection against dust and fumes and ensure that

persons within or entering the work area are also

protected.

♦ This tool is not intended for use by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with

the appliance.

♦ The intended use is described in this

instruction manual. The use of any accessory

or attachment or performance of any operation

with this tool other than those recommended

in this instruction manual may present a risk of

personal injury and/or damage to property.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS600E T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS600E T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info