Bedienungsanleitung Black Decker KS777 T1 (Seite 7 von 72) (Polnisch, Türkisch)

580991

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

♦ Loosen the screws (9).

♦ Pull the shoe plate (4) forward, rotate the shoe

plate (4) to the left or right and push it back

into the 45° location.

♦ Tighten the screws (9).

To reset the shoe plate for straight cuts:

♦ Loosen the screws (9).

♦ Pull the shoe plate (4) forward, rotate to the

centre and push it back into the 0° location.

♦ Tighten the screws (9).

Variable speed control

The tool has a variable speed on/off switch (1).

The operating speed depends on how far you

press the switch.

♦ Use a high speed for wood, medium speed for

aluminium and PVC and low speed for metals

other than aluminium.

Switching on and off

♦ To switch the tool on, press the variable speed

on/off switch (2).

♦ To switch the tool off, release the variable

speed on/off switch (2).

♦ For continuous operation, press the lock-on

button (1) and release the on/off switch (2).

♦ To switch the tool off when in continuous

operation, press the on/off switch (2) and

release it.

Sawing

Hold the tool ﬁ rmly with both hands while cutting.

The shoe plate (4) should be held ﬁ rmly against

the material being cut. This will help prevent the

saw from jumping, reduce vibration and minimise

blade breakage.

♦ Let the blade run freely for a few seconds

before starting the cut.

♦ Apply only a gentle pressure to the tool while

performing the cut.

Hints for optimum use

Sawing laminates

When cutting laminates, splintering may occur

which can damage the presentation surface. The

most common saw blades cut on the upward

stroke, therefore if the shoe plate is sitting on the

presentation surface either use a saw blade that

cuts on the downward stroke or:

♦ Use a ﬁ ne-tooth saw blade.

♦ Saw from the back surface of the workpiece.

♦ To minimise splintering, clamp a piece of

scrap wood or hardboard to both sides of the

workpiece and saw through this sandwich.

Sawing metal

Be aware that sawing metal takes much more

time than sawing wood.

♦ Use a saw blade suitable for sawing metal.

♦ When cutting thin sheet metal, clamp a piece

of scrap wood to the back surface of the

workpiece and cut through this sandwich.

♦ Spread a ﬁ lm of oil along the intended line of

cut.

Maintenance

Your Black & Decker tool has been designed to

operate over a long period of time with a minimum

of maintenance. Continuous satisfactory

operation depends upon proper tool care and

regular cleaning.

♦ Regularly clean the ventilation slots in your

tool using a soft brush or dry cloth.

♦ Regularly clean the motor housing using

a damp cloth. Do not use any abrasive or

solvent-based cleaner. Never let any liquid get

inside the tool and never immerse any part of

the tool into liquid.

Protecting the environment

Separate collection. This product must

not be disposed of with normal household

waste.

Should you ﬁ nd one day that your Black & Decker

product needs replacement, or if it is of no further

use to you, do not dispose of it with household

waste. Make this product available for separate

collection.

Separate collection of used products and

packaging allows materials to be recycled

and used again. Reuse of recycled

materials helps prevent environmental

pollution and reduces the demand for raw

materials.

Local regulations may provide for separate

collection of electrical products from the

household, at municipal waste sites or by the

retailer when you purchase a new product.

Black & Decker provides a facility for the

collection and recycling of Black & Decker

products once they have reached the end of their

working life. To take advantage of this service

please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest

authorised repair agent by contacting your local

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS777 T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS777 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info