Bedienungsanleitung Black Decker KS800 (Seite 6 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

497055

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

Labels on tools

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

 If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. Lock-on button

2. Variable speed on/off switch

3. Blade storage compartment cover

4. Shoe plate locking lever

5. Shoe plate

6. Blade support roller

7. Tool-free blade clamp

Assembly

Warning! Before attempting any of the following

operations, make sure that the tool is switched off and

unplugged and that the saw blade has stopped. Used saw

blades may be hot.

Fitting the saw blade (fig. A)

 Hold the saw blade (8) as shown, with the teeth facing

forward.

 Push and hold the blade clamp (7) down.

 Insert the shank of the saw blade into the blade holder

(9) as far as it will go.

 Release the blade clamp (7).

Saw blade storage (fig. B)

Saw blades (8) can be stored in the storage compartment

located on the side of the tool.

 Open the cover (3) of the saw blade storage

compartment by holding the tab on the top of the cover

(3) and pulling it outward.

 The blades are retained in the compartment by a

magnetic strip. To remove a blade, press down on one

end of the blade to raise the other end, and remove.

 Close the cover (3) of the saw blade storage

compartment and make sure that it is latched closed.

Warning! Close the compartment door securely before

operating the saw.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

 Injuries caused by touching any rotating/moving parts.

 Injuries caused when changing any parts, blades or

accessories.

 Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

 Impairment of hearing.

 Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Use

Adjusting the shoe plate for bevel cuts (fig. C and D)

Warning! Never use the tool when the shoe plate is loose

or removed.

The shoe plate (5) can be set to a left or right bevel angle of

up to 45°.

 Pull the shoe plate locking lever (4) outwards to unlock

the shoe plate (5) from the 0 degree position (fig. D).

 Pull the shoe plate (5) forward and set the required

bevel 15°, 30° and 45° indicated in the bevel angle

window.

 Push the shoe plate locking lever (4) back towards the

saw to lock the shoe plate (5).

To reset the shoe plate (5) for straight cuts:

 Pull the shoe plate locking lever (4) outwards to unlock

the shoe plate (5).

 Set the shoe plate (5) to an angle of 0° and push the

shoe plate backwards.

 Push the shoe plate locking lever (4) back towards the

saw to lock the shoe plate (5).

Switching on and off

 To switch the tool on, press the variable speed on/off

switch (2).

 To switch the tool off, release the variable speed on/off

switch (2).

 For continuous operation, press the lock-on button (1)

and release the on/off switch (2).

 To switch the tool off when in continuous operation,

press the on/off switch (2) and release it.

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS800 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info