Bedienungsanleitung Black Decker KS800ELW T1 (Seite 7 von 16) (Englisch)

580997

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons

regularly using power tools in employment, an estimation of

vibration exposure should consider, the actual conditions of

use and the way the tool is used, including taking account of

all parts of the operating cycle such as the times when the

tool is switched off and when it is running idle in addition to

the trigger time.

Labels on tools

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

XThis appliance is not intended for use by young or infirm

persons without supervision. Children must be

supervised to ensure they do not play with the

appliance.

XIf the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for non-rechargeable

batteries

XNever attempt to open for any reason.

XDo not store in locations where the temperature may

exceed 40 °C.

XWhen disposing of batteries, follow the instructions

given in the section "Protecting the environment".

Do not incinerate the batteries.

XUnder extreme conditions, battery leakage may occur.

When you notice liquid on the batteries, proceed as

follows:

- Carefully wipe the liquid off using a cloth. Avoid skin

contact.

Additional safety instructions for lasers

XThis laser complies with class 2 according to IEC

60825+A1+A2:2001. Do not replace a laser diode with

a different type. If the laser is damaged, have the laser

repaired by an authorised repair agent.

XDo not use the laser for any purpose other than

projecting laser lines.

XAn exposure of the eye to the beam of a class 2 laser is

considered safe for a maximum of 0.25 seconds. Eyelid

reflexes will normally provide adequate protection. At

distances greater than 1m, the laser complies with class

1 and is therefore considered completely safe.

XNever look into the laser beam directly and intentionally.

XDo not use optical tools to view the laser beam.

XDo not set up the tool where the laser beam can cross

any person at head height.

XDo not let children come near the laser.

Features

1. Lock-on button

2. Variable speed on/off switch

3. Blade storage compartment cover

4. Shoe plate locking lever

5. Dust extraction outlet

6. Dust extraction adaptor

7. Shoe plate

8. Blade support roller

9. Tool-free blade clamp

Additional features (fig. A)

Additional features may be applicable depending upon the

product purchased. The additional features applicable to the

catalogue number purchased are shown in fig. A.

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

Warning! To reduce the risk of injury, the user

must read the instruction manual.

Read all of this manual carefully.

This product is not to be used by

children under 16.

Laser radiation.

Do not look into the laser beam.

Do not use optical tools to view the

laser beam.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS800ELW T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS800ELW T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info