Bedienungsanleitung Black Decker KS850SLW T1 (Seite 10 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

581018

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

The laser visibility (power) will be reduced if the jigsaw is

overheated. The laser may not be visible when the saw is

overloaded for a prolonged period of time. The laser visibility

will gradually return to normal when the tool cools down even

when the tool is unplugged.

Warning! Do not leave the overheated laser switched ON.

Make sure that the switch is in the OFF position and remove the

batteries to remove power from the laser.

Using the laser (fig. J and K)

The laser projects the line of cut (18) on to the surface of the

workpiece.

X To switch the laser on, press the button (16).

X To switch the laser off, press the button (16) again.

Viewing from directly above the jigsaw, the line of cut (17)

can be easily followed. Should this view be restricted for any

reason, the laser can be used as an alternative cutting guide.

X Use a pencil to mark the cutting line (17).

X Position the jigsaw over the line (17).

X Switch on the laser.

Operating the work light (fig. L and M) ('W' units only)

Units that include a 'W' in the catalogue number are provided

with an LED light (19) to illuminate the area around the

blade.

X To switch the work light on, slide the switch (20) to the on

position (I).

X To switch the work light off, slide the switch (20) to the

off position (0).

Hints for optimum use

Sawing laminates

When cutting laminates, splintering may occur which can

damage the presentation surface. The most common saw

blades cut on the upward stroke, therefore if the shoe plate

is sitting on the presentation surface either use a saw blade

that cuts on the downward stroke or:

X Use a fine-tooth saw blade.

X Saw from the back surface of the workpiece.

X To minimise splintering, clamp a piece of scrap wood or

hardboard to both sides of the workpiece and saw

through this sandwich.

Sawing metal

Be aware that sawing metal takes much more time than

sawing wood.

X Use a saw blade suitable for sawing metal.

X When cutting thin sheet metal, clamp a piece of scrap

wood to the back surface of the workpiece and cut

through this sandwich.

X Spread a film of oil along the intended line of cut.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

X Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

X Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Never let any liquid get inside the tool and never

immerse any part of the tool into liquid.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker

product needs replacement, or if it is of no further

use to you, do not dispose of it with household

waste. Make this product available for separate

collection.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-

use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Batteries

Black & Decker batteries can be recharged many

times. At the end of their useful life, discard batteries

with due care for our environment:

X Place the batteries in suitable packaging to ensure that

the terminals cannot be short-circuited.

X Take the batteries to a local recycling station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS850SLW T1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS850SLW T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info