Bedienungsanleitung Black Decker KS900SW T1 (Seite 7 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

581119

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

X An exposure of the eye to the beam of a class 2 laser is

considered safe for a maximum of 0.25 seconds. Eyelid

reflexes will normally provide adequate protection. At

distances greater than 1m, the laser complies with class 1

and is therefore considered completely safe.

X Never look into the laser beam directly and intentionally.

X Do not use optical tools to view the laser beam.

X Do not set up the tool where the laser beam can cross any

person at head height.

X Do not let children come near the laser.

Features

1. Lock-on button

2. On/off switch

3. Blade storage compartment cover

4. Shoe plate locking lever

5. Dust extraction outlet

6. Dust extraction adaptor

7. Shoe plate

8. Auto Select

dial

9. Blade support roller

10. Tool-free blade clamp

Additional features (fig. A)

Additional features may be applicable depending upon the

product purchased. The additional features applicable to the

catalogue number purchased are shown in fig. A.

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

that the saw blade has stopped. Used saw blades may be

hot.

Fitting the saw blade (fig. B)

X Hold the saw blade (11) as shown, with the teeth facing

forward.

X Push and hold the blade clamp (10) down.

X Insert the shank of the saw blade into the blade holder (12)

as far as it will go.

X Release the blade clamp (10).

Saw blade storage (fig. C)

Saw blades (11) can be stored in the storage compartment

located on the side of the tool.

X Open the cover (3) of the saw blade storage compartment

by holding the tab on the top of the cover (3) and pulling it

outward.

X The blades are retained in the compartment by a magnetic

strip. To remove a blade, press down on one end of the

blade to raise the other end, and remove.

X Close the cover (3) of the saw blade storage compartment

and make sure that it is latched closed.

Warning! Close the compartment door securely before

operating the saw.

Connecting a vacuum cleaner to the tool (fig. D)

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool. The dust extraction adaptor (6) can be

purchased from your local Black & Decker retailer.

X Push the adaptor (6) into the dust extraction outlet (5).

X Connect the vacuum cleaner hose to the adaptor (6).

Use

Adjusting the shoe plate for bevel cuts (fig. E and F)

Warning! Never use the tool when the shoe plate is loose or

removed.

The shoe plate (7) can be set to a left or right bevel angle of

up to 45°.

X Pull the shoe plate locking lever (4) outwards to unlock the

shoe plate (7) from the 0 deg position (fig. E).

X Pull the shoe plate (7) forward and set the required bevel

15°, 30° and 45° indicated in the bevel angle window.

X Push the shoe plate locking lever (4) back towards the saw

to lock the shoe plate (7).

To reset the shoe plate (7) for straight cuts:

X Pull the shoe plate locking lever (4) outwards to unlock the

shoe plate (7).

X Set the shoe plate (7) to an angle of 0° and push the shoe

plate backwards.

X Push the shoe plate locking lever (4) back towards the saw

to lock the shoe plate (7).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS900SW T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS900SW T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info