Bedienungsanleitung Black Decker KW1600EA T1 (Seite 11 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

577908

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

ENGLISH

Switching on and off

Switching on

u Keep the lock-off button (2) depressed and press the

on/off switch (1).

u Release the lock-off button.

Switching off

u Release the on/off switch.

Warning! Always operate the tool with both hands.

Routing

u Fit the router bit and adjust to the required depth of cut as

described above.

u Holding the tool rmly with both hands by the handles (3),

place the tool on the workpiece and switch on.

u Allow the tool to build up speed before plunging down into

the workpiece. When the depth stop bar has been

contacted, operate the plunge lock lever (5).

u Carry out the operation by applying a constant force both

downwards and in the direction of cut. Retain a rm grip

on the handles and be prepared for a possible reaction

force if the router bit suddenly stalls e.g. following contact

with a knot.

u On completion of the operation, release the plunge lock

lever and control the upwards movement of the tool back

to its original position. When the tool has returned to its

original position, it can be switched off. Be aware that the

base is springloaded and that the tool will jump upwards if

not controlled.

Routing speed

The operating speed of the tool can be varied to affect the

level of nish. The correct speed selection will depend upon

the level of nish required, the type of material being

machined, the diameter and shape of the router bit.

u Prepare the tool to make a practice cut on a piece of scrap

material. Make a preliminary adjustment of the speed

control selecting a high speed for small diameter router

bits and a low speed for large diameter router bits.

u When the routing operation is completed, withdraw the

tool from the workpiece, switch off the tool and inspect the

level of nish. Adjust the speed control knob (4) and

repeat until an optimum level of nish is obtained.

Warning! Do not release the handles to adjust the speed

when the tool is locked down and operating in the workpiece.

Hints for optimum use

u When working on outside edges, move the tool

counterclockwise (g. N). When working on inside edges,

move the tool clockwise.

u Use HSS router bits for softwood.

u Use TCT router bits for hardwood.

u You can use the tool without a guide (g. O). This is useful

for signwriting and creative work. Only make shallow cuts.

u Refer to the table below for common types of router bits.

KW1600EA-Routerbits(g.P)

Description Application

Straight bit (1) Grooves and rebates

Trimming bit (2) Trimming laminates or hardwood;

accurate proling using a template

Rebating bit (3) Rebates on straight or curved workpieces

V-grooving bit (4) Grooves, engraving and edge bevelling

Core box bit (5) Fluting, engraving and decorative edge moulding

Cove bit (6) Decorative edge moulding

Ogee moulding bit (7) Decorative edge moulding

Rounding over bit (8) Rounding over edges

Dovetail bit (9) Dovetail joints

Chamfer bit (10) Chamfer edges

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

u Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Mainsplugreplacement(U.K.&Irelandonly)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new plug.

u Connect the blue lead to the neutral terminal.

u Connect the green/yellow lead to the earth terminal.

Warning! Follow the tting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW1600EA T1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KW1600EA T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info