Bedienungsanleitung Black Decker KW712 T1 (Seite 5 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578041

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for Australia and

New Zealand

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Additional safety instructions for planers

◆ Remove all nails and metal objects from the workpiece

before planing.

◆ Always hold the tool with both hands and by the handles

provided.

◆ Use sharp cutting blades only.

◆ Never put the tool down until the cutting blades have

come to a complete standstill.

◆ Immediately disconnect the cable from the mains if it is

damaged or cut.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-off button

3. Shavings discharge outlet

4. Planing depth adjustment knob

5. Planing depth graduation

Assembly

Warning! Make sure that the tool is switched off and

unplugged.

Replacing the cutting blades (fig. A)

The cutting blades provided with this tool are reversible.

Replacement cutting blades can be obtained from your local

retailer.

Removing

◆ Loosen the bolts (6) using the spanner supplied.

◆ Slide the blade (7) out of the holder.

◆ Reverse the blade so that the unused side comes in

position. If both sides are worn, the blade must be

replaced.

Fitting

◆ Slide the blade into the holder until it is against the end

stop.

◆ Tighten the bolts using the spanner supplied.

◆ Always replace both cutters.

Adjusting the depth of cut (fig. B)

The depth of cut is indicated by the marking (8). The setting

range can be read from the graduation (5).

◆ Turn the planing depth adjustment knob (4) to the required

depth of cut.

◆ Turn the knob to the ‘P’ postion whenever the tool is not

in use.

Fitting and removing the parallel fence (fig. C)

The parallel fence is used to for optimum control on narrow

workpieces.

◆ Loosen the locking knob (9).

◆ Insert the parallel fence (11) through the opening (10).

◆ Slide the parallel fence into the desired position.

◆ Tighten the locking knob.

◆ To remove the parallel fence proceed in reverse order.

Connecting a vacuum cleaner to the tool (fig. D)

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool. The adaptor can be purchased from your

local Black & Decker retailer.

◆ Slide the adaptor (12) over the shavings discharge outlet (3).

◆ Connect the vacuum cleaner hose (13) to the adaptor.

Assembling and fitting the shavings collection bag (fig. E)

The shavings collection bag is particularly useful when

working in confined spaces.

Before first use, you will have to assemble the shavings

collection bag.

◆ Fit the wire frames (14) to the connecting plate (15) using

the screws (16) and washers (17).

◆ Pull the cloth bag (18) over the frame structure as shown.

Take care that the elasticated mouth (19) is well fitted

around the edge of the connecting plate (15).

◆ Slide the connecting plate over the shavings discharge

outlet (3).

Use

◆ Adjust the depth of cut.

◆ If necessary, fit and adjust the parallel fence.

◆ Use sharp cutters only.

Switching on and off

Switching on

◆ Keep the lock-off button (2) depressed and press the on/

off switch (1).

◆ Release the lock-off button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW712 T1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KW712 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info