Bedienungsanleitung Black Decker KW712 T2 (Seite 8 von 12) (Englisch)

578042

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Switching on and off

Switching on

u Keep the lock-off button (2) depressed and press the on/off

switch (1).

u Release the lock-off button.

Switching off

u Release the on/off switch.

Planing

u Hold the tool with the nose piece of the shoe resting on

top of the workpiece surface.

u Switch the tool on.

u Move the tool steadily forward to perform the cutting stroke.

u Switch the tool off after the stroke has been completed.

Rebating (g. F)

u Fit and adjust the parallel fence. (KW712KA ONLY)

u Proceed as for planing.

Chamfering edges

The V-groove in the nose piece of the shoe enables you to

chamfer edges at 45° angles.

u Hold the tool at an angle with the groove around the edge

of the workpiece and perform the cutting stroke.

Emptying the shavings collection bag

The shavings collection bag should be emptied regularly while

using it.

u Unzip the bag and empty it before continuing.

Hints for optimum use

u Move the tool along the grain of the wood.

u If the grain is cross or curly, or if the workpiece material is

a hard type of wood, adjust the depth of cut to take only

a very thin shaving at each pass and take several passes

to achieve the desired result.

u To keep the tool in a straight line, press down the front of

the tool at the start, and press down the back of the tool at

the end of the cutting stroke.

Accessories

The performance of your tool depends on the accessory used.

BLACK+DECKER and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

The following types of cutting blades can be obtained from

your local retailer:

- Tungsten carbide tipped reversible cutting blades

(part no. X35007, supplied per pair)

- High-speed steel reversible cutting blades

(part no. X24192-XJ11, supplied per pair)

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

u Regularly clean the ventilation slots in your tool using a soft

brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Replacing the drive belt (g. G)

u Loosen the screws (20) and remove the cover (21).

u Remove the old drive belt.

u Place the new belt (22) over the pulleys. Place the belt

over the large pulley (23) rst, then over the small pulley

(24), whilst manually rotating the belt steadily.

u Put the cover back in place and tighten the screws.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your BLACK+DECKER product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product available

for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW712 T2 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KW712 T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info