Bedienungsanleitung Black Decker KW750 T4 (Seite 6 von 12) (Englisch)

578045

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

ENGLISH

(Original instructions)

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-off button

3. Shavings discharge outlet

4. Shavings discharge outlet selector

5. Planing depth adjustment knob

6. Planing depth graduation

Assembly

Warning! Before assembly, make sure that the tool is switched off

and unplugged.

Replacing the cutting blades (g. A)

The cutting blades provided with this tool are reversible.

Replacement cutting blades can be obtained from your local

retailer.

Removing

u Loosen the bolts (7) using the spanner supplied.

u Slide the blade (8) out of the holder.

u Reverse the blade so that the unused side comes in posi-

tion. If both sides are worn, the blade must be replaced.

Fitting

u Slide the blade into the holder until it is against the end

stop.

u Tighten the bolts using the spanner supplied.

Warning! Always replace both cutters.

Adjusting the depth of cut (g. B)

The depth of cut is indicated by the marking (9). The setting

range can be read from the graduation (6).

u Turn the planing depth adjustment knob (5) to the required

depth of cut.

u Turn the knob to the ‘P' postion whenever the tool is not in

use.

Fitting and removing the parallel fence (g. C)

The parallel fence is used to for optimum control on narrow

workpieces.

u Thread the knob (11) into the hole on the side of the

planer and securely tighten.

u Loosen the parallel fence adjustment knob (10).

u Slide the parallel fence into the desired position.

u Securely tighten the parallel fence adjustment knob.

Note : The parallel fence should be below the planer when

installed correctly.

u To remove the parallel fence proceed in reverse order.

Connecting a vacuum cleaner to the tool (g. D)

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool. The adaptor can be purchased from your

local Black & Decker retailer.

u Slide the adaptor (12) over the shavings discharge outlet

(3).

u Connect the vacuum cleaner hose (13) to the adaptor.

Fitting the shavings collection bag (g. E)

The shavings collection bag is particularly useful when working

in conned spaces.

u Slide the connecting plate (14) of the bag over either side

of the shavings discharge outlet (3).

u To prevent chips from coming out opposite side of shav-

ings discharge outlet, move the shavings discharge outlet

selector (4) to the opposite side from the bag.

Emptying the shavings collection bag

The shavings collection bag should be emptied regularly while

using it to prevent blocking.

u Unzip the bag and empty it before continuing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW750 T4 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KW750 T4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info