Bedienungsanleitung Black Decker KW900E (Seite 9 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

497061

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of

the operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. On/off switch

2. Lock-off button

3. Variable speed control knob

4. Plunge lock lever

5. Spindle lock button

6. Collet

7. Revolver depth stop

8. Chip deector

9. Depth stop bar

10. Depth of cut scale

11. Dust extraction adaptor

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingarouterbit(g.A)

u Remove the chip deector (8).

u Keep the spindle lock button (5) depressed and rotate the

spindle until the spindle lock fully engages.

u Loosen the collet nut (12) using the spanner provided.

u Insert the shank of the router bit (13) into the collet (6).

Make sure that the shank protrudes at least 3 mm from

the collet as shown.

u Keep the spindle lock button (5) depressed and tighten the

collet nut (12) using the spanner provided.

Fittingtheedgeguide(g.B)

The edge guide helps to guide the tool parallel to an edge.

u Fit the bars (14) to the edge guide (15) using the two

screws (16) provided.

u Insert the bars (14) into the router base as shown.

u Set the edge guide to the required distance.

u Tighten the xing screws (17).

Fittingthedustextractionadaptor(g.C)

The dust extraction adaptor allows you to connect a vacuum

cleaner to the tool.

u Connect the hose (18) of the vacuum cleaner to the

adaptor (11).

Fittingthetemplateguide(g.D)

u Fit the template guide (19) to the base of the router,

with the ange to the bottom (workpiece) side.

u Insert the two long screws (20) from the bottom side

through the template guide and the holes in the base.

u Place a nut onto each of the screws and securely tighten

the nuts.

Fittingthedistancepiece(g.E)

u Fit the distance piece (21) to the base of the router using

the screws provided.

Fittingthecentringpin(g.F)

u Fit the edge guide to the router as shown in g. B, but

upside down.

u Fit the centring pin (22) to the workpiece side of the edge

guide with the screw (23) provided.

Fittingthecopyfollower(g.G)

u Fit the edge guide to the router as shown in g. B.

u Fit the ‘L' bar (24) to the upper side of the edge guide

using the two screws and nuts provided.

u Adjust the rotating attachment (25) on the ‘L' bar with the

wing knob (26).

Use

Warning! Let the tool work at its own pace. Do not overload.

u Carefully guide the cable in order to avoid accidentally

cutting it.

Adjustingthedepthofcut(g.H,I&J)

The depth of cut is the distance X between the depth stop bar

(9) and the depth stop (27). The depth of cut can be set in two

different ways as described below.

Adjustingthedepthofcutusingthescale(g.I)

u Fit the router bit as described above.

u Loosen the locking screw (28).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KW900E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info