Bedienungsanleitung Black Decker KX2000K T1 (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

577928

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Features

1. On/off switch

2. Heat control knob

3. Nozzle

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting an accessory

A selected range of accessories can be obtained from your

local retailer.

- Cone nozzle Concentrates the air stream on a

smaller area

- Fish tail Spreads the air stream over a wider

area

- Spoon reflector For soldering pipes

- Glass protector For the protection of glass during

paint stripping

- Scraper For the removal of stripping paint and

varnish

◆ Fit the connecting piece of the accessory over the nozzle (3).

Warning! Ensure the tool is switched off and cooled before

fitting any accessory.

Use

Warning! Let the tool work at its own pace. Do not overload.

Setting the temperature (fig. A)

◆ To increase the temperature setting, turn the heat control

knob (2) clockwise.

◆ To reduce the temperature setting, turn the heat control

knob anti-clockwise.

Switching on and off

◆ To switch the tool on, set the on/off switch (1) to position I.

◆ To switch the tool off, set the on/off switch to position O.

Using the tool

◆ Allow the tool to heat up for a few seconds before use.

◆ At first use some smoke may emit from the nozzle. This is

normal and will soon decrease.

◆ Use a low temperature setting for drying paint and

varnish, removing stickers, shrinking insulation tubes, and

thawing frozen pipes.

◆ Use a medium temperature setting for welding plastics,

bending plastic pipes, and loosening tight nuts and

screws.

◆ Use a high temperature setting for removing paints and

lacquers, and soldering plumbing joints.

◆ If you are unsure about using this tool on a particular

material, start with a low temperature setting and

perform a test on scrap material.

Handsfree use (fig. B)

The tool has stand locations (4) to facilitate handsfree use.

◆ Place the tool with the nozzle up on a surface where it

cannot be tipped over.

◆ Secure the cable to prevent pulling the tool out of the stand.

Warning! Always point the tool away from yourself or other

persons. Do not touch the nozzle. Take care that no material

drops into the nozzle.

Paint stripping

◆ Direct the hot air at the working area to heat up the paint.

◆ Do not burn the paint. Keep the nozzle at least 25 mm (1")

from the surface.

◆ When the paint softens, remove the paint using a scraper.

Scrape the softened paint immediately or it will harden

again.

◆ Scrape with the grain of the wood wherever possible.

◆ Do not allow paint and debris collecting on the scraper.

◆ When scraping from a vertical position, scrape

downwards to prevent the paint from falling back into the

nozzle.

◆ When stripping paint from a surface next to glass, take

the necessary measures to protect the glass from the

heat.

◆ Warning! Do not attempt to strip paint from metal

framed windows.

◆ Dispose of all paint debris safely and ensure that the

work area is thoroughly cleaned after use.

Cooling down

During use, the nozzle of the tool becomes extremely hot.

After switching off, leave the tool to cool down for at least

30 minutes.

◆ Place the tool with the nozzle up on a surface where it

cannot be tipped over.

◆ To speed up the cooling time, run the tool on a low

minimum temperature setting for a few minutes before

switching off.

Maintenance

The tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous

satisfactorily operation depends upon proper tool care and

regular cleaning.

◆ Regularly clean the ventilation slots with a clean, dry

paint brush.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KX2000K T1 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KX2000K T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info