Bedienungsanleitung Black Decker KX200K T3 (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

577929

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

ENGLISH

(Original instructions)

u Use a medium temperature setting for welding plastics,

bending plastic pipes, and loosening tight nuts and

screws.

u Use a high temperature setting for removing paints and

lacquers, and soldering plumbing joints.

u If you are unsure about using this tool on a particular

material, start with a low temperature setting and perform

a test on scrap material.

Hands free use (g. B)

The tool has stand locations (4) to facilitate hands free use.

u Place the tool with the nozzle up on a surface where it

cannot be tipped over.

u Secure the cable to prevent pulling the tool over.

Warning! Always point the tool away from yourself or other

persons. Do not touch the nozzle. Take care that no material

drops into the nozzle.

Paint stripping

u Direct the hot air at the working area to heat up the paint.

u Do not burn the paint. Keep the nozzle at least 25 mm

from the surface.

u When the paint softens, remove the paint using a scraper.

Scrape the softened paint immediately or it will harden

again.

u Scrape with the grain of the wood wherever possible.

u Do not allow paint and debris to collect on the scraper.

u When scraping from a vertical position, scrape downwards

to prevent the paint from falling back into the nozzle.

u When stripping paint from a surface next to glass, take the

necessary measures to protect the glass from the heat.

Warning! Use a glass protector nozzle when stripping paint

from metal or wood framed windows.

u Dispose of all paint debris safely and make sure that the

work area is thoroughly clean after use.

Cooling down

During use, the nozzle of the tool becomes extremely hot.

After switching off, leave the tool to cool down for at least 30

minutes.

u Place the tool with the nozzle up on a surface where it

cannot be tipped over.

u To speed up the cooling time, run the tool on a low

minimum temperature setting for a few minutes before

switching off.

Maintenance

Your Black & Decker appliance has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper care

and regular cleaning of the appliance.

Warning! Switch off and unplug the appliance and allow it to

cool down before doing any maintenance on the appliance.

u Regularly clean the ventilation slots in your appliance

using a soft brush or dry cloth.

u To clean the appliance, use only mild soap and a damp

cloth. Do not use any abrasive or solvent-based cleaner.

Never let any liquid get inside the appliance and never

immerse any part of the appliance into liquid.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

u Connect the green/yellow lead to the earth terminal.

Warning! Follow the tting instructions supplied with good

quality plugs. Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent environ-

mental pollution and reduces the demand for raw

materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or

by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker ofce at

the address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KX200K T3 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info