Bedienungsanleitung Black Decker PH5551 (Seite 8 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

665812

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

ENGLISH

(Original instructions)

1. Hedge trimmer blade

2. Air vents

3. Lock-off angle adjustment button

4. Hedge trimmer head support

5. Locking sleeve (upper)

6. Pole extensionr

7. Locking sleeve (lower)

8. Harness

8a. Securing clip

9. Pole grip

10. Lock-off Button

11. On/Off switch

12. Main handle

13. Power cable

14. Cable strain reliever

15. Rear safe guard

16. Scabbard

Assembly

Warning!Before assembly, make sure that the

appliance is switched off and unplugged.

Warning!Always wear protective gloves when

working with pole pruner.

Warning!This product must be fully assembled

before operation. Do not use this product partially

assembled or assembled with damaged parts.

u The pole pruner shoould be full y assembled within the

package upon delivery.

u Remove the blade cover (17) from the blade (1) before

operating.

Switching on (Fig. A)

u Ensure that the pole pruner blade (1) does not touch any

object.

u Press the lock off button (10) and hold it in position.

u Press the on/off switch (11) to switch the product on.

Switching off

u Release the on/off switch (11).

Warning! Never attempt to lock a switch in the on position.

Extending the pole pruner (Fig. B)

u Loosen the lower locking sleeve (7).

u Push the pole (9) and the pole extension (6) towards each

other to retract, or away from each other to extend.

u Tighten the locking sleeve (7) once the desired length is

achieved.

Warning! Periodically check the connections to ensure that

they are tightened securely.

Warning! The length of the extension pole is limited. Stop

pushing / pulling as soon as you feel resistance. Only extend

to the length required to reach the hedges being trimmed.

Do not attempt to use the product at a lenght which does not

allow you to achieve proper footing and balance at all times.

Angle adjustment (Fig. C)

u Depress the lock-off button (3) of the trimmer head whilst

adjusting it.

u Ensure the lock-off button (3) snaps securely into place.

Warning! The head can be adjusted in ve different positions.

Always ensure the head is securely locked. Do not

attempt to use the product with the head in any other position

or unlocked.

Use

Warning! Let the tool work at its own pace. Do not overload.

Trimming (g. D, E, F, G)

u Adjust the pole to the required length.

u Cut and remove branches exceeding the cutting capacity

of this product using a hand pruner before operation.

Note: Jamming the blade on large branches can cause

damage.

u Always hold the product rmly with both hands on the

gripping surface and handle. Never operate this

product using only one hand.

Note: Try to keep the blades angled at approximately 15° to

the cutting surface (Fig D).

u Cut both sides from the bottom cutting upwards, this will

prevent any of the cuttings falling into the path of the area

still to be cut.

u After cutting the sides proceed to the top.

u When cutting wide hedges with the cutting area in sight

move the cutting blade lightly through the cutting surface

in a sweeping motion following the shape of the hedge or

shrub. A slight tilt downwards of the cutting blade in the

direction of motion is recommended for optimum cutting

performance.

u Move the trimmer with slow motion forward when cutting

an area out of sight.

u Do not rush and do not attempt to cut too much with one

stroke of the cutting blade.

u Cut in a number of stages if the area being cut is particu-

larly long to achieve a better result.

u In order to obtain a very straight cut, stretch a piece of

string along the length of the hedge at the desired height.

Use the string as a guideline, cutting just above it (Fig. E).

u In order to obtain at sides, cut upwards with the growth.

Younger stems move outwards when the blade cuts

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker PH5551 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info