Bedienungsanleitung Black Decker RSP1050 T1 (Seite 6 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

581266

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

(Original instructions)

Vibration

The declared vibration emission values stated in the technical

data and the declaration of conformity have been measured

in accordance with a standard test method provided by

EN 60745 and may be used for comparing one tool with

another. The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Warning! The vibration emission value during actual use of

the power tool can differ from the declared value depending

on the ways in which the tool is used. The vibration level may

increase above the level stated.

When assessing vibration exposure to determine safety

measures required by 2002/44/EC to protect persons regularly

using power tools in employment, an estimation of vibration

exposure should consider, the actual conditions of use and the

way the tool is used, including taking account of all parts of the

operating cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time.

Labels on tool

The following pictograms are shown on the tool:

Warning! To reduce the risk of injury, the user must

read the instruction manual.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Using an extension cable

Always use an approved extension cable suitable for the

power input of this appliance (see technical data). The

extension cable must be suitable for outdoor use and marked

accordingly. Up to 30 m of 1.5 mm2 HO5VV-F extension cable

can be used without loss of product performance. Before use,

inspect the extension cable for signs of damage, wear and

ageing. Replace the extension cable if damaged or defective.

When using a cable reel, always unwind the cable completely.

Features

This tool includes some or all of the following features.

1. Adjustable shoe

2. Blade clamp collar

3. Auxiliary handle

4. Pendulum selector switch

5. Variable speed on/off switch

6. Shoe release button

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and that

the saw blade has stopped. Used saw blades may be hot.

Fitting the saw blade (g. D)

u Hold the tool away from the body

u Rotate the blade clamp collar (2) in the direction shown in

gure D

u Insert the shank of the blade fully into the blade clamp

collar (2).

u Release the blade clamp collar (2) to lock the blade into

position

Note: The blade can be installed with the teeth up to assist in

ush cutting

Removing the saw blade (g. D)

Warning! Burn hazard: Do not touch the blade immediately

after use. Contact with the blade may result in personal injury.

u Rotate the blade clamp collar (2) to the release position

u Remove blade (8)

Auxiliary handle

The auxiliary handle offers a greater choice of gripping posi-

tions. Eight clamping locations are available for the placement

of the auxiliary handle.

Attaching the auxiliary handle (g. B)

u Wrap the handle (3) and strap around the forward gripping

area of the saw.

u Make sure that the handle (3) and strap indexing features

(7) are fully engaged in the matching saw positions.

u Hook the clamp and strap together and press the clamp

lever to the handle (3) to securely latch the handle.

u Check to make sure that the handle (3) is secure before

cutting.

Removing the auxiliary handle.

u Lift the clamp lever and unhook the clamp from the strap.

u Separate and remove the handle (3) and strap from the

saw.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker RSP1050 T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker RSP1050 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info