Bedienungsanleitung Black Decker S600 T1 (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

586424

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

Warning! Never fill above the “max” line on the liquid reservoir.

Dispensing liquid (fig. G)

◆ Press the dispense button (2). The liquid will continue to

dispense as long as the dispense button is kept depressed.

Warning! Do not dispense the liquid towards equipment

containing electrical components, such as the interior of ovens.

Switching on and off (fig. G)

◆ To switch the appliance on at low speed, set the on/off

switch to position 1.

◆ To switch the appliance on at high speed, set the on/off

switch to position 2.

◆ To switch the appliance off, set the on/off switch to

position 0.

Hints for optimum use

The appliance can be used with a variety of cleaning agents,

including bathroom, automotive, patio furniture, carpet and

other common household cleaners. Always read and follow

the manufacturer’s instructions on the cleaning agent you use.

Do not use the appliance with abrasive cleaning agents.

Warning! Wear gloves and eye protection when using

aggressive chemical cleaners.

◆ Before cleaning carpets, thoroughly vacuum the surface.

◆ For soiled carpets, dip the shampoo brush in a cleaning

solution and shampoo the soiled area. Move the

appliance in a circular pattern. Do not hold the appliance

in one place while running. Once the foam has

disappeared, let it dry, then vacuum the carpet.

◆ If you are unsure about using this appliance on a particular

surface, test it first on a small inconspicious patch.

Cleaning and maintenance

◆ Regularly clean the motor unit using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

◆ After every use, clean the accessories in soapy water.

◆ Clean the liquid dispensing system after every use and

before storage.

Cleaning the liquid reservoir (fig. F)

◆ Remove the liquid reservoir cap (21).

◆ Empty the liquid reservoir (5) as necessary.

◆ Wipe the inside of the liquid reservoir with a soft damp

cloth and flush with water.

Cleaning the nozzle (fig. H)

◆ Loosen the nozzle (3) and remove it using the cleaning

tool (18).

◆ Immerse the nozzle for a half hour in clear warm water.

◆ Clean the grooves in the nozzle using a fine synthetic brush.

◆ Re-fit the nozzle. Be careful not to overtighten.

◆ Fill the reservoir (5) with clear water.

◆ Dispense the liquid until the reservoir is empty.

◆ Repeat this procedure 1 or 2 times with clear water.

Cleaning the dispensing system (fig. H)

◆ Loosen the nozzle (3) and remove it using the cleaning

tool (18).

◆ Fill the reservoir (5) with warm water.

◆ Dispense the liquid until the reservoir is empty.

◆ Repeat this procedure 1 or 2 times with warm water.

◆ Re-fit the nozzle. Be careful not to overtighten.

Unclogging the dispensing system (fig. H & I)

◆ Fill the reservoir (5) with clear warm water up to the

“max” line.

◆ Loosen the nozzle (3) and remove it using the cleaning

tool (18).

◆ Press the dispense button (2) while inserting the front end

of the cleaning tool (18) into the dispense tube (22)

repeatedly until the dispensing system is unclogged.

The dispensing system is unclogged when the sound of

pressure release is heard, followed by water exiting the nozzle.

◆ Remove the cleaning tool. Dispense the liquid until the

reservoir is empty.

◆ Repeat this procedure 1 or 2 times as necessary to restore

the full flow.

◆ Re-fit the nozzle. Be careful not to overtighten.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker S600 T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info