Bedienungsanleitung Black Decker SMS216 T1 (Seite 14 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578653

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

ENGLISH

changing the blades. Use correctly sharpened saw blades.

Observe the maximum speed and tooth type marked on the

saw blade. Only use Black & Decker recommended blades.

To replace the blade (24), proceed as follows:

X Using a screwdriver, loosen but do not remove the

screw (37). Do not remove the screw completely as it

will make re-assembly difficult.

X Using a screwdriver, loosen but do not remove the

screw (38). Do not remove the screw completely as it

will make re-assembly difficult.

X Press the saw arm release lever (26) and rotate the

moveable lower guard (4) counter clockwise and clear

of the blade. Use one hand to hold the guard in place

(fig. O).

X Move the spindle guard plate (40) counter clockwise

(fig. O) to give you access to the spindle bolt (39) that

attaches the blade to the mitre saw.

X Press the spindle lock button (41) which is located on

the motor housing to lock the saw blade and prevent it

from rotating.

X Using the supplied blade spanner, turn the spindle

bolt (39) in a clockwise direction to remove the bolt and

the blade (24).

X Fit a replacement blade, make sure that the teeth are

pointing downward and the direction marking on the

blade is the same as that on the mitre saws guard

(clockwise) (fig O).

X Loosely fit the spindle bolt (39) by hand and turn counter

clockwise.

X Press the spindle lock button (41) which is located on

the motor housing to lock the saw blade and prevent it

from rotating.

X Use the blade spanner to tighten the spindle bolt (39)

until the blade is secure.

X Allow the moveable lower guard (4) to return to its

original position covering the blade.

X Move the spindle guard plate (40) into its original

position and tighten the two screws (37 and 38).

Warning! Never press the spindle lock while the blade is

rotating. Be sure to hold the guard bracket down and firmly

tighten the guard bracket screw after installing the blade.

Warning! The guard bracket must be returned to its original

position and the screw tightened before activating the saw.

Failure to do so may allow the guard to contact the spinning

saw blade resulting in damage to the saw and severe

personal injury.

Accessories

The performance of your tool depends on the accessory

used. Black & Decker and Piranha accessories are

engineered to high quality standards and designed to

enhance the performance of your tool. By using these

accessories you will get the very best from your tool.

Warning! Do not carry the machine by the guard.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous

satisfactory operation depends upon proper tool care and

regular cleaning. Regularly clean the ventilation slots with a

clean, dry paint brush. To clean the tool, use only mild soap

and a damp cloth. Never let any liquid get inside the tool and

never immerse any part of the tool into liquid.

Warning! To reduce the risk of injury, turn the unit off and

disconnect the tool from the power source before installing

and removing accessories, before adjusting or changing set-

ups or when making repairs. Be sure the trigger switch is in

the OFF position. An accidental start-up can cause injury.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

X Safely dispose of the old plug.

X Connect the brown lead to the live terminal in the new

plug.

X Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 13 A.

Protecting the environment

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-

use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Separate collection. This product must not be

disposed of with normal household waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker SMS216 T1 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker SMS216 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info