Bedienungsanleitung Black Decker SMS216 T1 (Seite 9 von 20) (Englisch)

578653

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

 The blade guard on your saw will automatically raise

when the arm is brought down; it will lower over the

blade when the arm is raised. The guard can be raised

by hand when installing or removing saw blades or for

inspection of the saw. Never raise the blade guard

manually unless the machine is switched off.

 Check periodically that the motor air slots are clean and

free of chips.

 Do not work with material containing asbestos.

Asbestos is considered to be carcinogenic.

 Never make the warning signs on the power tool

unrecognisable.

 Never stand on the power tool. Serious injuries could

occur when the power tool tips over or when coming in

contact with the saw blade.

 Do not take hold of the saw blade after working before it

has cooled. The saw blade becomes very hot while

working.

 Advance the saw blade against the workpiece only

when it is switched on. Otherwise, the danger of kick-

back exists when the saw blade catches in the

workpiece.

 The intended use is described in this instruction manual.

The use of any accessory or attachment or performance

of any operation with this tool other than those

recommended in this instruction manual may present a

risk of personal injury and/or damage to property.

 Never place hands near cutting area. Keep hands

outside the “No Hands Zone” which includes entire table

and is labelled by “No Hands” symbols.

 To avoid injury from materials being thrown, unplug the

saw to avoid accidental starting, and then remove small

materials.

 Before use and after any maintenance the blade guard

must be checked to ensure proper function. This test

must be performed with the saw switched off and

unplugged. The arm must be raised and lowered to

ensure the guard covers the blade and the blade does

not contact the guard. If the guard fails to operate

correctly, have your power tool serviced by a qualified

repair agent. Call Black & Decker customer services for

you nearest service agent.

Residual risks

The following risks are inherent to the use of saws:

 Injuries caused by touching the rotating parts.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided, these are:

 Impairment of hearing.

 Risk of accidents caused by the uncovered parts of the

rotating saw blade.

 Risk of injury when changing the blade.

 Risk of squeezing fingers when opening the guards.

 Health hazards caused by breathing dust developed

when sawing wood, especially oak, beech and MDF.

Additional safety instructions for lasers

This laser complies with class 1M according to IEC

60825-1:2007. Do not replace a laser diode with a different

type. If the laser is damaged, have the laser repaired by an

authorised repair agent. Do not use the laser for any purpose

other than projecting laser lines.

 Never look into the laser beam directly and intentionally.

 Do not use optical tools to view the laser beam.

 Do not set up the tool where the laser beam can cross

any person at head height.

 Do not let children come near the laser.

Warning! Avoid direct eye contact. Laser radiated when

laser guide is turned on. Avoid direct eye contact. Always un-

plug the mitre saw from power source before making any

adjustment.

 A laser pointer is not a toy and should not come into

hands of children. Misuse of this appliance can lead to

irreparable eye injuries.

 Any adjustment to increase the laser power is forbidden.

Any liability for damages as a result of not following

these safety instructions will be rejected.

 When using the laser pointer, do not point the laser

beam towards people and/or reflecting surfaces. Even a

laser beam of lower intensity may cause eye damage.

Therefore, do not look directly into the laser beam.

 The laser pointer includes no servicing components. Do

not open the housing otherwise the guarantee is void.

Safety of others

 This tool is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning the use of the appliance by a person

responsible for their safety.

 Children should be supervised to ensure that they do

not play with the appliance.

Vibration

The declared vibration emission values stated in the

technical data and the declaration of conformity have been

measured in accordance with a standard test method

provided by EN 61029 and may be used for comparing one

tool with another. The declared vibration emission value may

also be used in a preliminary assessment of exposure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker SMS216 T1 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker SMS216 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info