Bedienungsanleitung Black Decker v 4810 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

319659

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

u Leave the appliance to charge for at

least 24 hours.

Whilst charging, the charger may become

warm. This is normal and does not

indicate a problem. The appliance can be

left connected to the charger indenitely.

Important! Place the appliance on the

charging base whenever it is not in use.

Do not charge the battery at ambient

temperatures below 10 °C or above 40 °C.

Operatingtheappliance(g.E)

u To switch on, slide the on/off switch (1)

forward.

u To switch off, slide the on/off switch

back.

Accessories(g.B&C)

V1250/V4810/V4820/V7210/V9650

These models are supplied with the

following accessories:

u a hard brush (6) for furniture and

stairs (not for V4820)

u a crevice tool (7) for conned spaces

u a soft brush (8) for keyboards and

lamp shades (V4820)

V1250/V9650

Two additional accessories are stored in

a portable caddy located in the charging

base:

u a soft brush (8) for keyboards and

lamp shades

u an extendable crevice tool (9) for

longer reach in conned spaces

V1250N

This model is not supplied with accessories.

To t an accessory, proceed as follows:

u Take the accessories from the

appliance.

u Insert the appropriate accessory into

the front of the appliance.

Cleaning and maintenance

Warning! Regularly clean the lters.

Cleaningthedustbowlandlters

(g.F&G)

The lters are re-usable and should be

cleaned regularly.

u Press the release button (2) and

remove the dust bowl (3).

u Empty the dust bowl.

u Remove the lters (10) by twisting

them clockwise.

u Brush any loose dust off the lters.

u Wash the lters in warm, soapy

water. The bowl can also be washed

if necessary. Do not immerse the

appliance in water.

u Make sure the dust bowl and lters

are dry.

u Ret the lters (10) onto the appliance,

twisting them counterclockwise until

they lock into place.

u Ret the dust bowl onto the appliance.

Make sure the dust bowl clicks into

place.

Warning! Never use the appliance without

the lters. Optimum dust collection will

only be achieved with clean lters and an

empty dust bowl.

Replacingthelters

The lters should be replaced every 6 to 9

months and whenever worn or damaged.

Replacement lters are available from

your Black & Decker dealer (catalogue

number: VF20).

u Remove the old lters as described

above.

u Fit the new lters as described above.

Maintenance

Your tool has been designed to operate

over a long period of time with a minimum

of maintenance. Continuous satisfactory

operation depends upon proper tool care

and regular cleaning.

Warning! Before performing any

maintenance, switch off and unplug the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker v 4810 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker v 4810

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info