Bedienungsanleitung Black Decker vb 1630 (Seite 9 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

315880

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

12. Brush tool

13. Parquet floor head (VB1630/VB1740/VB1850)

The parquet floor head is not included with all models.

This accessory is available from your Black & Decker

dealer / service centre (cat. no. VW70).

Assembly

Fitting the dustbag (fig. C & D)

Warning! Before first use, make sure to fit a dustbag.

◆ Open the cover (5) as shown (fig. C).

◆ Place a dustbag (15) in the dustbag holder (16).

◆ Align the dustbag collar (17) with the inlet (18) (fig. D).

◆ Make sure that the inlet protrudes into the dustbag collar.

◆ Close the cover.

Connecting the hose (fig. E)

◆ Insert the hose connector (18) into the inlet (19) of the

appliance.

◆ Slide the hose further until the release buttons (20) click

into place.

◆ To disconnect the hose, press the release buttons and pull

out the hose.

Mounting the extension tube (fig. F)

◆ Press the lock button (21) and slide the hose nozzle (22)

into the tube (8) until it clicks into place.

◆ To remove the tube, press the lock button and pull the

hose out of the tube.

Mounting the suction head (fig. G)

The suction head (9) allows for vacuuming on carpet and hard

surfaces (e.g. laminate and tiles).

◆ Press the lock button (23) and slide the tube (8) into the

head (9) until it clicks into place.

◆ To remove the head, press the lock button and pull the

tube out of the head.

VB1630/VB1740/VB1850 - Mounting the parquet floor

head (fig. G)

The parquet floor head (13) allows for vacuuming on wooden

and polished surfaces.

◆ Press the lock button (23) and slide the tube (8) into the

head until it clicks into place.

◆ To remove the head, press the lock button and pull the

tube out of the head.

Mounting accessories (fig. G & H)

The crevice tool (11) allows for vacuuming in narrow and

hard-to-reach places. The brush tool (12) allows for vacuuming

on furniture, blinds, curtains, windows and stairs.

The accessories can be mounted on both the hose (6) and the

tube (8). When not in use, the accessories can be stored in the

accessory holder (24).

◆ Remove the accessory from the holder (fig. H).

◆ Press the lock button (21 or 23) and slide the accessory

onto the hose nozzle (22) or the tube (8) (fig. G).

◆ To remove an accessory, press the lock button (21 or 23)

and pull the accessory off.

Use

Unwinding and rewinding the cord (fig. A)

The cord rewind button (3) can be operated by hand or foot.

◆ Before use, pull a sufficient length of cord from the back

of the appliance.

◆ After use, press the cord rewind button to store the cord

back into place. Manually guide the cord to ensure it does

not swing back. Ensure the plug is correctly located.

Adjusting the length of the tube (fig. I)

The extension tube (8) can be adjusted in 21 steps.

◆ Engage the adjustment knob (25) and slide the tube to the

desired length.

◆ Release the knob.

Adjusting the suction head (fig. G)

◆ For vacuuming on carpets, switch the floor surface

selector (26) into the up position.

◆ For vacuuming on laminates, tiles, etc., switch the floor

surface selector into the down position.

Switching on and off (fig. A)

The on/off switch (1) can be operated by hand or foot.

◆ To switch the appliance on, press the on/off switch (1).

◆ To switch the appliance off, press the on/off switch again.

VB1630/VB1740/VB1820/VB1850 - Setting the suction force

(fig. A)

The speed control switch (2) allows for a precise setting of the

suction force.

◆ Slide the speed control switch (2) to the desired setting.

◆ For vacuuming on hard surfaces (e.g. floors), choose a

high speed setting.

◆ For vacuuming on soft surfaces (e.g. upholstery), choose a

low speed setting.

Adjusting the airflow (fig. A)

◆ Move the airflow control switch (7) to adjust the airflow

as desired.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker vb 1630 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info