Bedienungsanleitung Black Decker vl 1840 (Seite 11 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

315883

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

◆ Release the knob.

Adjusting the suction head (fig. E)

◆ For vacuuming on carpets, switch the floor surface

selector (24) into the up position.

◆ For vacuuming on laminates, tiles, etc., switch the floor

surface selector into the down position.

Switching on and off (fig. A)

The on/off switch (1) can be operated by hand or foot.

◆ To switch the appliance on, press the on/off switch (1).

◆ To switch the appliance off, press the on/off switch again.

Setting the suction force (fig. A)

The speed control switch (2) allows for a precise setting of the

suction force.

◆ Slide the speed control switch (2) to the desired setting.

◆ For vacuuming on hard surfaces (e.g. floors), choose a

high speed setting.

◆ For vacuuming on soft surfaces (e.g. upholstery), choose a

low speed setting.

Adjusting the airflow (fig. A)

◆ Move the airflow control switch (7) to adjust the airflow

as desired.

Vacuuming

◆ When operating the appliance, make sure that the hose is

not trapped, twisted or blocked.

◆ In case of overheating, a cut-out will operate and the

appliance will automatically stop.

◆ If the appliance stops operating, unplug the appliance and

allow it to cool for 2-3 hours.

Hints for optimum use

◆ When working in confined spaces, temporarily remove the

accessory holder from the tube to improve your scope.

◆ When vacuuming stairs, always start at the bottom and

work your way up. Position the appliance on the floor and

do the stairs until halfway. Then carry the appliance to

a stable position which is at least one stair below your

working position, and do the top half of the stairs.

VL2040 - Using the turbo brush

◆ Take care that the speed control switch is at the highest

setting. Move the slider on top of the brush as necessary

to optimise the suction force.

◆ Move the brush steadily back and forth. Do not keep the

brush on the same place for a long time, as this might

damage the surface.

Carrying the appliance (fig. H)

During use the appliance can be carried using the handle (4).

◆ Tilt the handle into position as shown.

Temporarily parking the suction head (fig. I)

◆ Use the park position (25) for a temporary parking of the

suction head.

Storing the appliance (fig. J)

Warning! When storing the appliance, switch the appliance

off and unplug it.

◆ Make sure that the cord is fully rewound.

◆ Place the appliance in an upright position.

◆ Park the tube by placing the ridges on the head and the

tube in the corresponding slots on the appliance as

shown. The locking device (26) engages automatically.

◆ Store the appliance in a dry location. The appliance can

be carried at the integrated handle (27).

◆ To take the tube from the appliance for use, press one of

the lock buttons and lift the tube and head out of the

parking slots.

Maintenance

Your Black & Decker appliance has been designed to operate

over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

appliance care and regular cleaning.

Warning! Before performing any maintenance or cleaning on

the appliance, unplug the appliance.

◆ Regularly clean the ventilation slots in your appliance

using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

VL2040 - Clearing the turbo brush (fig. K)

◆ Remove any hair or threads collected onto the brush (28).

Use a pair of scissors if necessary.

◆ Remove the cover (29) to remove any foreign objects

blocking the air turbine (30). Re-fit the cover.

Emptying the container (fig. L & M)

The container (31) must be emptied when the red container

full indicator (17) is lit or if the container is visibly full.

◆ Remove the container from the appliance by releasing the

container retaining clip (32) and lifting the container at

the handle (33) (fig. L).

◆ Slightly retract the hook (34) to remove the cover (5) from

the container (31) (fig. M).

◆ Empty the container as necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker vl 1840 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker vl 1840

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info