Bedienungsanleitung Black Decker VL2000 T3 (Seite 12 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

586571

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

◆ Clean the filter as described below.

◆ Re-fit the cover (5), taking care that the hook (34) clicks

back in place.

◆ Re-insert the container into the appliance until the clip

(32) engages.

Cleaning

Warning! Before cleaning and maintenance, switch the

appliance off and unplug it.

◆ From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner. Do not

immerse the appliance in water.

Cleaning the container filter (fig. L - O)

The container filter prevents dust and dirt from entering the

motor housing. The filter is re-usable and should be cleaned

regularly.

◆ Remove the container from the appliance (fig. L).

◆ Remove the cover (5) from the container (31) (fig. M).

◆ Pull the filter (35) off the filter holder (36) (fig. N).

◆ Shake off excess dust by tapping the filter into a dustbin.

◆ Gently clean the folds of the filter (35) using the brush (14)

(fig. O).

Warning! Do not brush or use compressed air to clean the

filter.

◆ Depending on its condition, rinse the outside of the filter

with water. Allow the filter to dry for 24 hours before re-

inserting it.

Warning! Do not wash the inside of the filter.

◆ Replace the filter.

◆ Re-fit the cover.

◆ Re-insert the container into the appliance.

Cleaning the motor filter (fig. L & P)

The motor filter prevents particles and larger objects from

entering the motor housing when the container is removed.

The filter is re-usable and should be cleaned regularly.

◆ Remove the container from the appliance (fig. L).

◆ Take the filter (37) out (fig. P).

◆ Brush any loose dust off the filter.

◆ Replace the filter.

◆ Re-insert the container into the appliance.

Replacing the filters (fig. L - Q)

If the container filter is damaged or fails to operate properly,

it must be replaced. When replacing the container filter,

the motor filter and the outlet filters have to be replaced as

well. Replacement filter sets are available from your

Black & Decker dealer (cat. no. VLF10).

Replacing the container filter (fig. L - N)

◆ Proceed as described above to replace the filter (35).

Replacing the motor filter (fig. L & P)

◆ Proceed as described above to replace the filter (37).

Replacing the outlet filters (fig. Q & R)

◆ Open the cover (38).

◆ Remove the old filters (39).

◆ Insert the new filters as shown.

◆ Close the cover.

VL2040 - Replacing the charcoal filter

The charcoal filter removes odours and smoke from the air

exiting the motor housing. The filter should be replaced every

6 to 9 months and whenever worn or damaged. Replacement

filters are available from your Black & Decker dealer

(cat. no. VBF40).

◆ Proceed as described above to replace the filter (40).

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker VL2000 T3 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info