Bedienungsanleitung Black Decker vpx 1201 (Seite 7 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

388385

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISH

Driving screws

X When driving screws, the forward/reverse button (4)

should be pushed to the left.

X Move the forward/reverse button (4) pushed to the right

for removing screws.

Drilling

X Use sharp drill bits only.

X Support and secure the work properly.

X Run the drill very slowly, using light pressure, until the

hole is started.

X Apply pressure in a straight line with the bit. Use enough

pressure to keep the bit biting but not so much as to stall

the motor or deflect the bit.

X Hold the drill firmly with two hands to control its twisting

action.

X Do not click the trigger of a stalled drill on and off in an

attempt to start it. Damage to the drill can result.

X Minimize stalling on breakthrough by reducing pressure

and drilling slowly through the last part of the hole.

X Keep the motor running while pulling the bit out of a

drilled hole. This will help reduce jamming.

X With variable speed drills there is no need to centre

punch the point to be drilled. Use a slow speed to start

the hole and accelerate by squeezing the trigger harder

when the hole is deep enough to drill without the bit

skipping out. Operate at full speed after starting the bit.

Drilling wood

Holes in wood can be made with the same twist drill bits used

for metal or with spade bits. These bits should be sharp and

should be pulled out frequently when drilling to clear chips

from the flutes of the drill.

Drilling in metal

Use a cutting lubricant when drilling metals. The exceptions

are cast iron and brass which should be drilled dry. The

cutting lubricants that work best are sulfurized cutting oil or

lard oil.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

X Regularly clean the ventilation slots in your tool using a

soft brush or dry cloth.

X Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Never let any liquid get inside the tool and never

immerse any part of the tool into liquid.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again. Re-

use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have

reached the end of their working life. To take advantage of

this service please return your product to any authorised

repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Batteries

Black & Decker batteries can be recharged many

times. At the end of their useful life, discard batteries

with due care for our environment:

X Run the battery down completely, then remove it from

the tool.

X Lithium Ion batteries are recyclable. Take them to any

authorised repair agent or a local recycling station.

Technical data

VPX1201

Voltage Vdc 7

No load speed rpm 195/625

Power source 1 VPX

battery

pack

Max drilling size, wood & metal mm 6

Spindle lock torque kgf/cm 110

Output torque (max) Nm 17

Charger type single port

Battery type VPX

battery

pack

Weight (bare unit) kg 0.62

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker vpx 1201 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info