Bedienungsanleitung Black Decker WBV1450 T1 (Seite 6 von 24) (Englisch, Italienisch)

586595

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ENGLISH

(Original instructions)

Connecting the hose (g. E)

u Insert the hose connector (21) into the inlet (22) of the

appliance.

u Press rmly until it clicks into place.

Disconnecting the hose (g. E)

u Press the hose release button (23).

u Pull the hose connector (21) out of the inlet (22) of the

appliance.

Fitting the extension tube (g. F)

u Firmly push one of the extension tubes (2) into the handle

adaptor (3).

u If required, attach the second extension tube (2) to the

end.

Fitting accessories (g. F)

The crevice tool (9) allows for vacuuming in narrow and hard-

to-reach places.

The upholstery tool (8) allows for vacuuming on furniture,

blinds, curtains, windows and stairs.

The oor head (11) is used for wet/dry vacuuming.

The accessories can be t on both the handle adaptor (3) and

the extension tubes (2).

u Firmly push the accessory onto the handle adaptor (3) or

extension tube (2) as required.

u To remove an accessory, pull the accessory from the

handle adaptor or the extension tube.

Note: When not in use the the accessories can be stored on

the accessory mounts (7).

Use

Switching on and off (g. G)

u To switch the appliance on, press the on/off switch (5) in to

position I.

u To switch the appliance off, press the on/off switch (5) in to

position 0.

u To switch the appliance into dust extraction mode, press

the on/off switch (5) in to position II (WBV1405P only).

Vacuuming

u When operating the appliance, make sure that the hose is

not trapped, twisted or blocked.

Note: When Vacuuming you should ensure that either the lter

or the paper dust bag is tted.

Wet pick up

Note: Before using the appliance to clean up spills etc.,

remove the lter or the paper dust bag depending on which

is tted.

u Fit the oor head (11).

Caution! The container (1) should be checked and emptied

frequently.

Note: after wet use the container should be emptied and

wiped. When the container is dry the lter or the paper dust

bag should be re-tted.

Dust extraction mode (WBV1405P only)

Warning! The socket outlet is only for the connection of power

tools to the vacuum cleaner. Any other use of the socket outlet

is not permitted.

Warning! Only suitable for tools rated 2000W or less.

Warning! make sure that the power tool is switched off before

connecting to the socket on the vacuum cleaner.

u Plug your tool into the power tool socket (12) on the side

of the vacuum cleaner.

u Insert the handle adaptor (4) into the dust extraction hole

of your tool (an adaptor may be required)

u Press the on/off switch (5) in to position II.

Note: When you turn on your power tool the vacuum cleaner

will automatically start. When you turn off the power tool there

will be a short delay before the vacuum cleaner turns off, this

is to allow the tool and the exible hose to be clear of debris.

Optimising the suction force

In order to keep the suction force optimised, the lters must be

cleared regularly during use.

Storing the appliance

Warning! When storing the appliance, switch the appliance off

and unplug it.

u Place the appliance in an upright position.

u Store the appliance in a dry location. The appliance can

be carried by the handle (6).

Maintenance

Your Black & Decker corded/cordless appliance/tool has been

designed to operate over a long period of time with a minimum

of maintenance. Continuous satisfactory operation depends

upon proper tool care and regular cleaning.

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker WBV1450 T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info