Bedienungsanleitung Black Decker XT2000 T1 (Seite 3 von 24) (Deutsch, Englisch, Italienisch, Portugiesisch, Spanisch)

582910

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ENGLISH

Intended use

Your Black & Decker iron has been designed for ironing

garments made of linen, cotton, silk, wool and synthetic

materials. This product is intended for household use only.

Safety instructions

◆ Warning! When using mains-powered appliances, basic

safety precautions, including the following, should always

be followed to reduce the risk of fire, electric shock and

personal injury.

◆ Read all of this manual carefully before using the appliance.

◆ The intended use is described in this manual. The use of

any accessory or attachment or the performance of any

operation with this appliance other than those recommended

in this instruction manual may present a risk of personal

injury.

◆ Retain this manual for future reference.

Using your appliance

◆ Always take care when using the appliance.

◆ Do not use the appliance outdoors.

◆ Do not operate the appliance if your hands are wet.

Do not operate the appliance if you are barefoot.

◆ Guide the power supply cord neatly so it does not hang

over the edge of a worktop and cannot be caught

accidentally or tripped over.

◆ Never pull the power supply cord to disconnect the plug

from the socket. Keep the power supply cord away from

heat, oil and sharp edges.

◆ If the power supply cord is damaged during use,

disconnect the appliance from the power supply

immediately. Do not touch the power supply cord before

disconnecting from the power supply.

◆ Disconnect the appliance from the power supply when not

in use and before cleaning.

Safety of others

◆ Do not allow children or any person unfamiliar with these

instructions to use the appliance.

◆ Do not allow children or animals to come near the work

area or to touch the appliance or power supply cord.

Close supervision is necessary when the appliance is

used near children.

After use

◆ Switch off, remove the plug from the socket and let the

appliance cool down before leaving it unattended and

before changing, cleaning or inspecting any parts of the

appliance.

◆ When not in use, the appliance should be stored in a dry

place. Children should not have access to stored

appliances.

Inspection and repairs

◆ Before use, check the appliance for damaged or defective

parts. Check for breakage of parts, damage to switches

and any other conditions that may affect its operation.

◆ Do not use the appliance if any part is damaged or defective.

◆ Have any damaged or defective parts repaired or replaced

by an authorised repair agent.

◆ Before use, check the power supply cord for signs of

damage, ageing and wear.

◆ Do not use the appliance if the power supply cord or

mains plug is damaged or defective.

◆ If the power supply cord or mains plug is damaged or

defective it must be repaired by an authorised repair

agent in order to avoid a hazard. Do not cut the power

supply cord and do not attempt to repair it yourself.

◆ Never attempt to remove or replace any parts other than

those specified in this manual.

Electrical safety

◆ Always check that the mains voltage corresponds to the

voltage on the rating plate.

◆ This product must be earthed.

◆ Do not immerse the appliance, power supply cord

or plug in water or other liquid.

◆ If it is necessary to use an extension cable, use

an approved 3-core cable suitable for the power

input of this product (see rating plate).

Additional safety instructions for irons

◆ Always route the cord carefully to avoid a tripping hazerd.

◆ Do not use the appliance near water.

◆ Do not place the appliance near heat sources or directly

under cabinets. Do not use the appliance in the presence

of explosive or flammable materials.

◆ The filling apperture must not be opened during use.

◆ Steam may escape from the soleplate.

◆ Surfaces may be hot during use and during the cooldown

period.

◆ Set the temperature control dial to the min position

before plugging in or out.

◆ Let the appliance cool down before leaving it unattended

and before cleaning or inspecting any parts of the appliance.

◆ The power supply cord should not touch the hot soleplate

during use or during the cool down period.

◆ Do not touch the soleplate until it has cooled down.

◆ Wait until the appliance has cooled down before

emptying the water tank as the water may still be hot.

◆ Always diconnect the appliance from the supply before

filling, emptying, cleaning, or carying out any

maintenance on the appliance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker XT2000 T1 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info