Bedienungsanleitung Black Decker xta 90 ek (Seite 5 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Finnisch)

390059

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

Use of the power tool for operations different from those

intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Dust extraction outlet

5. Sanding disc

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting the sanding disc (fig. A)

◆ Place the tool on a table, with the spindle facing up.

◆ Place the sanding disc (5) onto the spindle.

◆ Secure the sanding disc using the screws (6).

Fitting sanding sheets (fig. B)

Warning! Never use the tool without a sanding sheet or

accessory in place.

◆ Press the sheet firmly and evenly onto the sanding disc

(5), making sure that the holes in the sheet line up with

the holes in the base.

Fitting and removing the dustbag (fig. C)

◆ Fit the dustbag (7) over the dust extraction outlet (4).

◆ To remove the dustbag, pull it off the dust extraction

outlet.

Connecting a vacuum cleaner (fig. D)

◆ Insert the hose (8) of the vacuum cleaner into the dust

extraction outlet (4).

Use

Warning! Let the tool work at its own pace. Do not overload.

Variable speed control

The variable speed control allows you to adapt the speed of

the tool to the workpiece material.

◆ Set the control knob (3) to the desired setting. Use a high

speed for wood, medium speed for veneer and synthetics

and low speed for acrylic glass, non-ferrous metals and

for removing paints.

Switching on and off

◆ To switch the tool on, press the on/off switch (1).

◆ For continuous operation, press the lock-on button (2) and

release the on/off switch.

◆ To switch the tool off, release the on/off switch. To

switch the tool off when in continuous operation, press

the on/off switch once more and release it.

Automatic brake system

This feature keeps the speed of the disc limited as long as the

tool does not touch the workpiece. As soon as the tool is

placed on the workpiece, the disc will reach its normal

operating speed.

Emptying the dustbag

The dustbag should be emptied every 10 minutes.

◆ Shake the dustbag to empty the contents.

Hints for optimum use (fig. E)

◆ Do not exert too much pressure on the tool.

◆ Regularly check the condition of the sanding sheet.

Replace when necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker xta 90 ek Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info