Bedienungsanleitung Black Decker XTA80E T2 (Seite 5 von 12) (Englisch)

578198

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for sanders

◆ Warning! Contact with or inhalation of dusts arising

from sanding applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Thoroughly remove all dust after sanding.

◆ Take special care when sanding paint which is possibly

lead based or when sanding some woods and metal

which may produce toxic dust:

- Do not let children or pregnant women enter the work

area.

- Do not eat, drink or smoke in the work area.

- Dispose of dust particles and any other debris safely.

◆ Before using the tool on wooden workpieces, make sure

to fit the dust cassette.

◆ Before using the tool on metal workpieces, make sure to

remove the dust cassette.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Adjustable handle

5. Tension lever

6. Retractable hood

7. Centring knob

8. Dust extraction outlet

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting a sanding belt (fig. A)

Warning! Never use the tool without a sanding belt.

◆ Pull the tension lever (5) outward to release the tension

on the sanding belt (9).

◆ Remove the old sanding belt.

◆ Place a new sanding belt over the rollers. Ensure that the

arrow on the sanding belt points in the same direction as

the arrow on the tool.

◆ Push the tension lever (5) inward to tension the sanding belt.

Adjusting the sanding belt tracking (fig. B)

To ensure a correct tracking, the sanding belt must be centred

over the rollers.

◆ Switch on the tool while holding it upside down.

◆ Turn the centring knob (7) as required until the tracking of

the belt is centred over the rollers.

Adjusting the handle (fig. C)

The handle is adjustable to 3 positions.

◆ Unlock the handle (4) by pulling the locking handle (10)

outward.

◆ Adjust the handle in the desired position.

◆ Lock the handle by pushing the locking handle inward.

Retracting the hood (fig. D)

The hood can be retracted for sanding in confined spaces.

Warning! The hood can only be retracted when the

adjustable handle is in the up position.

◆ Adjust the handle (4) in the straight-up position.

◆ Lift the hood (6) up.

◆ To close the hood, pull the tab (11) sideways first.

Fitting and removing the dust cassette (fig. E)

◆ Slide the dust cassette (12) over the dust extraction outlet (8).

◆ To remove the dust cassette, slide it off the outlet.

Connecting a vacuum cleaner (fig. F)

◆ Slide the adaptor (13) over the dust extraction outlet (8).

◆ Connect the hose of the vacuum cleaner to the adaptor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker XTA80E T2 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker XTA80E T2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info