Bedienungsanleitung Black Decker xts 10 ek (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

383512

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is

maintained.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

Additional safety instructions for jigsaws

◆ Warning! Contact with or inhalation of dusts arising

from cutting applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

Features

This tool includes some or all of the following features.

1. On/off switch

2. Lock-on button

3. Variable speed control knob

4. Mode selector switch

5. Saw blade locking lever

6. Saw blade holder

7. Shoe plate

8. Shoe plate locking knob

9. Scroll knob

10. Saw blade storage compartment

Assembly

Warning! Before attempting any of the following operations,

make sure that the tool is switched off and unplugged and

that the saw blade has stopped. Used saw blades can be hot.

Fitting the saw blade (fig. A)

◆ Hold the saw blade (11) as shown, with the teeth facing

forward.

◆ Push the lever (5) downwards.

◆ Insert the shank of the saw blade into the blade holder (6)

as far as it will go.

◆ Release the lever.

◆ Adjust the blade support roller as described below.

Adjusting the blade support roller (fig. A & B)

After fitting the blade, you need to adjust the blade support

roller (12).

◆ Turn the blade support adjustment screw (13) in the

counterclockwise direction.

◆ Slide the blade support roller against the rear of the blade.

The blade must locate in the central recess of the roller.

◆ Turn the blade support adjustment screw in the clockwise

direction to lock the blade support in place.

Connecting a vacuum cleaner to the tool (fig. C & D)

◆ Align the dust extraction adaptor (14) with the saw shoe

as shown.

◆ Insert the ribs (15) into the slots (16).

◆ Push the adaptor backwards to lock it in position.

◆ Connect the vacuum cleaner hose (17) (not supplied) to

the adaptor.

Dust extraction is not possible when making bevel cuts.

Warning! Do not use the dust extraction adaptor when

sawing metal.

Use

Warning! Never use the tool when the saw shoe is loose or

removed.

Adjusting the shoe plate for bevel cuts (fig. E)

The shoe plate can be set to a left or right bevel angle of up to

45°.

◆ Turn the locking knob (8) in direction A to release the shoe

plate (7).

◆ Pull the shoe plate (7) backwards and set it to the

required angle. You can use the scale or a protractor to

check the angle.

◆ Turn the locking knob (8) in direction B to lock the shoe

plate in place.

To reset the shoe plate for straight cuts:

◆ Turn the locking knob (8) in direction A to release the shoe

plate (7).

◆ Pull the shoe plate backwards and set it to an angle of

approx. 0°.

◆ Push the shoe plate forward.

◆ Turn the locking knob (8) in direction B to lock the shoe

plate in place. Make sure that the shoe plate is supported

by the guide ribs.

Setting the operating mode (fig. F)

In the straight cutting mode, the saw blade can be set and

locked in 4 positions: forward, reverse, left or right.

◆ Turn the mode selector switch (4) to position A (scrolling

mode).

◆ Rotate the saw blade into the required direction using the

scroll knob (9).

◆ Turn the mode selector switch (4) to position B (straight

cutting mode). In this position the scroll knob cannot be

rotated. The saw blade is locked in its position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker xts 10 ek Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info