Bedienungsanleitung Black Decker XTW1500E T1 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

577915

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for routers

◆ Only use router bits with a shank diameter equal to the

size of the collet installed in the tool.

◆ Only use router bits suitable for the no-load speed of the

tool.

◆ Never use router bits with a diameter exceeding the

maximum diameter specified in the technical data section.

◆ Hold the tool by the handles as indicated.

◆ Do not use the tool in an inverted position.

◆ Do not attempt to use the tool in a stationary mode.

◆ Remove all nails and metal objects from the workpiece

before routing.

◆ Before cutting into walls, floors or ceilings, check for the

location of wiring and pipes.

◆ Take special care when routing MDF or surfaces coated

with lead-based paint:

– Wear a dust mask specifically designed for protection

against lead paint dust and fumes and ensure that persons

within or entering the work area are also protected.

– Do not let children or pregnant women enter the work

area.

– Do not eat, drink or smoke in the work area.

– Dispose of dust particles and any other debris safely.

◆ Always wear a dust mask.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. On/off switch

2. Lock-off button

3. Handle

4. Variable speed control knob

5. Plunge lock lever

6. Spindle lock button

7. Collet

8. Revolver depth stop

9. Depth stop bar

10. Chip deflector

11. Dust extraction adaptor

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fitting a router bit (fig. A)

◆ Remove the chip deflector (10) by pulling it straight up

from the router base.

Warning! Beware not to bend the chip deflector.

◆ Keep the spindle lock button (6) depressed and rotate the

spindle until the spindle lock fully engages.

◆ Loosen the collet nut (17) using the spanner provided.

◆ Insert the shank of the router bit (18) into the collet (7).

Make sure that the shank protrudes at least 3 mm from

the collet as shown.

◆ Keep the spindle lock button (6) depressed and tighten the

collet nut (17) using the spanner provided.

Fitting the edge guide (fig. B)

The edge guide (12) helps to guide the tool parallel to an edge.

◆ Insert the bars (19) into the router base as shown.

◆ Set the edge guide to the required distance.

◆ Tighten the fixing screws (20).

Fitting the dust extraction adaptor (fig. C)

The dust extraction adaptor allows you to connect a vacuum

cleaner to the tool.

◆ Place the dust extraction adaptor (11) onto the dust

extraction outlet as shown.

◆ Connect the hose (23) of the vacuum cleaner to the

adaptor (11).

Fitting the template guide (fig. D)

◆ Fit the template guide (13) to the base of the router,

with the flange to the bottom (workpiece) side.

◆ Insert the two long screws (24) from the bottom side

through the template guide and the holes in the base.

◆ Place a nut onto each of the screws and securely tighten

the nuts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker XTW1500E T1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info