Bedienungsanleitung Blaupunkt 200 series (Seite 25 von 182) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

790575

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

ENGLISH

CD/MP3/WMA mode| Inserting/ejecting a CD | Connecting / Removing a USB data carrier

Notes:

•The respective audio source can be select-

ed only if a corresponding CD is inserted or

a corresponding device is connected.

•If the car sound system rst has to read the

data of a connected device or data carrier

before the playback, the display shows

"READING". The duration of the reading

depends on the data volume and design

of the device or data carrier. If the device

or data carrier is defective or the trans-

ferred data cannot be played back, a corre-

sponding message appears on the display

(e.g. "CD ERROR").

Inserting/ejecting a CD

Inserting a CD

Risk of severe damage to the CD

drive!

Noncircular contoured CDs (shape CDs)

and CDs with a diameter of 8 cm (mini CDs) must

not be used.

We accept no responsibility for any damage to the

CD drive that may occur as a result of the use of

unsuitable CDs.

Note:

You must not hinder or assist the drive as it

automatically draws in the CD.

If the inserted CD cannot be played back, "CD

ERROR” is briey displayed and the CD is au-

tomatically ejected after approx. 2 seconds.

Ejecting a CD

Press the button to eject an inserted CD.

Notes:

•If a CD is ejected and not removed, the

drive will automatically draw it back in

again after approx. 10 seconds.

•You can also eject CDs while the car sound

system is switched o or while another au-

dio source is activated.

Connecting/removing a USB data carrier

You can connect USB data carriers to the USB

port at the front of the device.

Connecting a USB data carrier

Swich o the car sound system so that the

data carrier will be correctly registered.

Connect the USB data carrier.

Turn on the car sound system.

If the USB data carrier is initially selected as

audio source, the data are read rst.

Selecting tracks/folder

Interrupting playback

Press the button to interrupt the playback

("PAUSE") or to continue it.

Playing tracks in random order

Press the button to change among the

playback modes.

MIX

Press the button to change among the

playback modes:

RPT

If the MIX function is switched on, the icon

(mix all tracks) or (mix tracks of cur-

rent folder) is shown on the display.

If the REPEAT function is switched on, the icon

(repeat tracks) or

（Repeat folder) is shown on the display.

Repeatedly playing individual tracks

or directories

Conguring the display

Press the DIS button once or several times to

toggle between these displays:

• Track name, artist and album name must be

stored as ID3 tag to be able to display them.

• Current playback total time.

• The le and folder name is displayed only in

MP3/WMA mode.

You can nd new track or folder selectiing.

Long press the button for approx. 2 sec-

onds to select previous/next folder.

Short press the button to select pre-

vious/next track.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt 200 series Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info