Bedienungsanleitung Blaupunkt 5B47M8060 (Seite 19 von 44) (Englisch)

686518

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Cleaning function en

.Cleaning function

Cl eani ng functi on

The appliance has a "Self-cleaning" function and a wet-

cleaning assistant.

The cooking compartment can be cleaned effortlessly

using the "Self-cleaning" function, and the cleaning

assistant takes the hard work out of cleaning your

cooking compartment every day.

Self-cleaning

The cooking compartment can be cleaned effortlessly

using the "Self-cleaning" function. The cooking

compartment is heated up to a very high temperature.

Food remnants from roasting, grilling and baking will

burn.

You can choose from three cleaning cycles.

The dirtier the cooking compartment and the longer the

dirt has been there, the more powerful the cleaning

cycle should be. It is sufficient to clean the cooking

compartment every two to three months. You can clean

it more frequently if necessary. Cleaning requires

approx. 2.5-4.8 kilowatt hours.

Notes

■ For safety reasons, the appliance door locks

automatically once a certain temperature is reached.

You will not be able to open it again until the lock

symbol n on the display has gone out.

■ The interior lighting will not come on while the

appliance is being cleaned.

:Warning

Risk of burns!

■ The cooking compartment becomes extremely hot

during the cleaning function. Never open the

appliance door. Allow the appliance to cool down.

Keep children away from the appliance.

Risk of burns!

■ ; The appliance will become very hot on the

outside during the cleaning function. Never touch the

appliance door. Allow the appliance to cool down.

Keep children away from the appliance.

Before running the cleaning function

Make sure that the cooking compartment is empty.

Remove any accessories, cookware or shelf rails from

the cooking compartment. Please see the relevant

section for information on how to remove the rails.

~ "Rails" on page 21

Clean the appliance door and along the edges of the

cooking compartment in the area around the seal. Do

not scrub or remove the seal.

:Warning

Risk of fire!

■ Loose food remnants, fat and meat juices may catch

fire when the cleaning function is in progress. Before

you start the cleaning function, always remove the

worst of the food residues and remnants from the

cooking compartment.Do not use the cleaning

function for cleaning accessories.

Risk of fire!

■ The appliance will become very hot on the outside

during the cleaning function. Never hang

combustible objects, e.g. tea towels, on the door

handle. Do not place anything against the front of

the appliance. Keep children away from the

appliance.

Setting the cleaning function

Make sure you follow all the preparation instructions

before setting the cleaning function.

The length of time each cleaning cycle runs for has

been preset and cannot be changed.

1. Use the function selector to select the < function.

A A will be shown on the display panel.

2. Use the temperature selector to set the cleaning

setting.

Your chosen setting will be shown on the display

panel.

The cleaning function will start after a few seconds. The

programme will count down on the display panel.

Ventilate the kitchen while the self-cleaning function is

running.

The appliance door will lock shortly after the function

starts running. The H symbol will appear on the display

panel.

An audible signal will sound once the self-cleaning

cycle has finished. ‹‹:‹‹ will appear on the display

panel. Switch the appliance off by turning the function

selector to the "Off" position.

You will not be able to open the appliance door again

until the cooking compartment has cooled down

sufficiently and the lock symbol H on the display has

gone out.

Setting a later end time

You can delay the end until later. Before starting, touch

and hold the r button until the end time symbol is

highlighted on the display panel. Use the } selector to

set a later end time.

The appliance will switch to standby after it is started.

Changing and cancelling

The power of the cleaning cycle cannot be changed

once it has started.

The end time can be changed while the appliance is on

standby.

If you would like to cancel the cleaning function, switch

the appliance off by turning the function selector to the

"Off" position.

The appliance door will remain locked until the cooking

compartment has cooled down sufficiently and the lock

symbol on the display has gone out.

Cycle Cleaning perfor-

mance

Length of cycle

1 Gentle Approx. 1 hour and 15 minutes

2 Medium Approx. 1 hour and 30 minutes

3 Intensive Approx. 2 hours

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt 5B47M8060 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt 5B47M8060

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info