Bedienungsanleitung Blaupunkt 5BD32451 (Seite 50 von 84) (Deutsch, Englisch, Holländisch, Französisch)

613295

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Setting the timer.

You can use the timer as a normal kitchen timer. It operates

independently of the oven. The timer has a specific signal. This

informs you when the timer or cooking time has elapsed. You

can also set the timer if the childproof lock is active.

Setting procedure

1. Press the S timer button.

The

S symbol flashes.

2. Use the + or - buttons to set the timer time.

Default value for button + = 10 minutes

Default value for button - = 5 minutes

The timer starts after a few seconds. The

S symbol is lit in the

display. The time counts down in the display.

The time has elapsed

A signal sounds. Press the

S timer button. The timer display

goes out.

Changing the alarm time

Press the S timer button. Use the + or - buttons to change the

time.

Delete the setting

Press the

S timer button. Press the - button until zeros appear

in the display.

The timer and the cooking time run down in synchronisation

The symbols are lit. The timer time counts down in the display.

Check the remaining

x cooking time, y end time or 0 time

of day:

Press the

0 clock button repeatedly until the relevant symbol

is displayed.

The requested value appears in the display for several

seconds.

Childproof lock

Oven

To ensure that the oven cannot be switched on by children

when playing, a childproof lock is incorporated in the

appliance.

Switching the childproof lock on and off

The function selector must be switched off.

Press the

C key button repeatedly until the C symbol

appears in the display. This procedure takes approx.

4 seconds.

Deactivating: Press the

C key button repeatedly until the C

symbol goes out.

Notes

■ You can set the timer and clock at any time.

■ If the childproof lock is active, it will be cancelled following a

power cut.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content,

■ scouring pads,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Control panel Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Do not use glass cleaner or glass

scrapers for cleaning.

Stainless-steel

surfaces

Clean with warm soapy water and a soft cloth.

On stainless-steel surfaces, always wipe par-

allel to the natural grain. Otherwise, you may

scratch the surface. Dry with a soft cloth.

Remove flecks of limescale, grease, starch

and albumin (e.g. egg white) immediately. Do

not use any abrasive materials, scouring

sponges or rough cleaning cloths. Polish the

stainless-steel fronts using special care prod-

ucts. Follow the manufacturer's instructions.

Special stainless-steel cleaning agents are

available from the after-sales service or from

specialist retailers.

Enamel sur-

faces and lac-

quered

surfaces

Wipe with warm soapy water and a cloth. Dry

with a soft cloth.

Rotary knobs Wipe with warm soapy water and a cloth. Dry

with a soft cloth.

Glass panel Clean using glass cleaner. Do not use any

abrasive cleaning agents or sharp metal

objects. These may scratch and damage the

surface of the glass panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt 5BD32451 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt 5BD32451

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info