Bedienungsanleitung Blaupunkt 5DA36251 (Seite 21 von 56) (Deutsch, Englisch, Holländisch, Französisch)

614173

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Replacing bulbs

These instructions apply to several appliance variants. It is

possible that individual features are described which do not

apply to your appliance.

: Risk of burns!

Halogen bulbs become very hot when switched on. There is still

a risk of burning for some time after they have been switched

off. Allow the halogen bulbs to cool down before replacing

them.

: Risk of electric shock!

When changing the bulbs, the bulb socket contacts are live.

Before changing the bulb, unplug the appliance from the mains

or switch off the circuit breaker in the fuse box.

Important Only use a bulb of the same type and same power

(see the bulb holder or rating plate inside the appliance) – to

do this, remove the metal mesh grease filter.

Replacing halogen bulbs

Note: When inserting halogen bulbs, do not touch the glass

tube. Use a clean cloth to insert the halogen bulbs.

1. Carefully remove the bulb ring using a suitable tool.

2. Pull out the bulb and replace it with a bulb of the same type.

3. Insert the bulb cover.

4. Insert the mains plug or switch on the fuse again.

LED lights

Defective LED lights may be replaced by the manufacturer, their

customer service or a qualified technician (electrician) only.

: Risk of injury!

The light emitted by LED lights is very dazzling, and can

damage the eyes (risk group 1). Do not look directly into the

switched on LED lights for longer than 100 seconds.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate with these numbers can be

found inside the appliance (remove the metal mesh grease

filter to gain access).

You can make a note of the numbers of your appliance and the

telephone number of the after-sales service in the space below

to save time should it be required.

Please be aware that a visit by an after-sales engineer will be

charged if a problem turns out to be the result of operator error,

even during the warranty period.

After-sales contact details for all countries can be found in the

attached after-sales service directory.

Accessories

(not included in the scope of delivery)

Note: These instructions apply to several appliance models. It

may be the case that an optional accessory that is listed does

not apply for your appliance.

Note: Observe the installation instructions in the accessory.

--------

E no. FD no.

After-sales service

Accessories Order number

Basic equipment:

Starter set for circulating-air mode

Throw-away filter for starter set

5Z5145X5

11008080

Handle strip: 60 cm:

Stainless steel 5Z5760N0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt 5DA36251 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info