Operating the appliance en
31
Switching on the appliance
1. Turn tap fully on.
2. Switch on ON/OFF switch (.
The Eco 50° programme has been
preset for environmentally friendly
operation whenever the appliance
starts. This programme remains
selected if no other programme
button 0 is pressed.
3. Press START button h.
Programme sequence starts.
Note:
For ecological reasons the Eco 50°
programme is preset whenever the
appliance starts. This conserves
environmental resources and not least
saves you money.
The Eco 50° programme is a
particularly environmentally friendly
programme. According to EU
regulation 1016/2010 it is the
“Standard programme” which is the
most efficient standard cleaning cycle
for cleaning normally soiled utensils in
terms of the combined energy and
water consumption for cleaning these
types of utensils.
Time preselection *
Ti me pr es el ec t i on
* depending on the configuration of
your specific dishwasher
You can delay the start of the
programme by up to 24 hours.
Here’s how to set up the delay:
1. Switch on ON/OFF switch (.
2. Press the timer programming button
X - or +.
The display window )" shows
‹‹h:‹‹m.
3. Keep pressing the timer
programming button X - or + until
the desired time is displayed.
4. Press START button h.
The delay timer has been activated.
5. To clear the specified delay, press
the button X - or + repeatedly until
the display window )" shows
‹‹h:‹‹m.
Programme end
The programme has finished when the
value ‹‹h:‹‹m appears in the display
window )". If a value has been set for
the signal volume, then the end of the
programme is also indicated audibly by
a buzzer.
* The end of the programme is
displayed on the floor – provided the
TimeLight (optical display) is switched
on and is visible.
Note: When Eco drying is activated, the
end of the programme is not indicated
by a buzzer.
* depending on the features of your
dishwasher
