Bedienungsanleitung Blaupunkt acapulco rdm 168 (Seite 25 von 30) (Englisch)

165611

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Setting the equalizer

The acoustic characteristics of the car in-

terior affect the quality of the sound repro-

duced in your vehicle to a much greater ex-

tent than the speakers.

Position, installation and the rear volumes

of, for example, the door or rear window

shelf all play an important role.

Even the sound produced by well selected

and installed speakers can be affected ne-

gatively by the resonance in the vehicle in-

terior.

As a result, the bass sounds may be lost or

reverberate, the mid-range tones sound too

overpowering and music instruments or

voices may be distorted or the total sound

quality may be completely lifeless.

The overall sound quality can be greatly

enhanced if certain frequencies are suppres-

sed or boosted.

This car audio system is equipped with one

(Biarritz RDM 169, Montana RDM 169, Se-

villa RDM 168) or two (Acapulco RDM 168)

parametric filters. The first filter “LOW EQ”

can be set from 32 to 500 Hz, the second

filter “HIGH EQ” from 630 to 10,000 Hz. In

this context, parametric means that it is pos-

sible to set the frequency and either boost

or reduce it (+10 to –20 dB) individually for

each of these filters.

These parametric filters can be adjusted to

very exact settings even without the help of

measuring instruments.

The individual steps you have to take to

make these settings are described in the

following table.

Notes on making the settings

The following notes are intended as recom-

mendations only. They do not necessarily

reflect your own personal sound prefe-

rences.

We recommend that you use a music CD

you are familiar with to make the settings.

The CD should include tracks with different

instruments and vocals. Purely electronic

music is not well suited to serve as a basis

for making the settings because the original

sounds cannot be determined.

Before you set the equalizer, set bass, treb-

le, balance and fader to “0” and switch the

Loudness function off, if necessary.

This setting is described in the Quick Refe-

rence under AUD.

Now listen to the CD you have selected.

Evaluate the sound according to your own

personal preferences.

Now refer to “Sound impression/problem” in

the table and you will find suggestions to

eliminate any problems under “What to do”.

The “HIGH EQ” and “LOW EQ” filters can

be set in the “DSC” menu:

• Press “DSC”. Press

/ as often as

necessary until “HIGH EQ” or “LOW

EQ” appears in the display.

• Press << or >> once and set the level

in the following table by pressing

/ .

• Press << >> to switch the frequency

range.

• Press “DSC” to store your settings.

You can switch the equalizer on and off in

the “DSC” menu using the “EQ ON” or “EQ

OFF” option.

Now you can compare the sound produced

by your car stereo with or without the equa-

lizer.

BA AcaBiaMonSevRDM168/169gb® 28.05.2002, 15:48 Uhr53

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt acapulco rdm 168 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt acapulco rdm 168

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info