Bedienungsanleitung Blaupunkt ACM 5450 (Seite 7 von 14) (Englisch)

614681

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

ACM 5450

Anti-theft protection

Security code

This car radio is supplied with inactive code

protection. In order to switch the security

coding system on, proceed as described in

the following.

If the coding system is active while the power

supply to the system is interrupted (e.g. theft,

disconnection of the car battery), the set will

be electronically blocked. In such a case it

can only be made operable again by entering

the correct code number given in the car

radio passport.

Entry of a wrong code number

It should not be possible for a thief to find out

the correct code number by trial and error.

This is why the set will be blocked for a certain

period of time after a wrong code number has

been entered. The display will then show

“- - - -”.

After the first three unsuccessful attempts

the system will lock for 10 seconds; after

further attempts, the waiting time extends to

one hour.

After 19 unsuccessful attempts the display

will show “OFF”. In this case you can no

longer re-start the unit.

Notice:

Keep your car radio passport with the code

number in a safe place in order to avoid

“unauthorised access” to your car radio.

When the security code system is activated,

the unique code must be entered each time

the power to the unit was interrupted.

The radio will function again as soon as you

have entered the correct code.

If you have lost your radio passport and

forgotten the code number, your radio can

only be made operable again by one of our

authorised service workshops, which is sub-

ject to payment.

Switching on security coding

To activate the coding system:

• Turn off the radio.

• Press preset buttons 1 and 4 simul-

taneously and hold down.

• Turn on the radio.

The display shows “CODE”.

• Briefly press preset button 1; the dis-

play shows “0000”.

• Enter the code number given in the

Blaupunkt car radio passport.

Example: The code number is 2521.

- Press preset button 1 twice; the dis-

play shows “2000”.

- Press preset button 2 five times; the

display shows “2500”.

- Press preset button 3 twice; the dis-

play shows “2520”.

- Press preset button 4 once; the dis-

play shows “2521”.

• To confirm the code number:

Press the

button.

Now the security coding system is active.

The display will briefly show “C” each time the

set is turned on.

If the display shows “CODE ERR”, you have

entered a wrong code. Re-enter the correct

code after the waiting time (“CODE” will ap-

pear in the display).

If you switch off the set while it is blocked, the

waiting time will start anew as soon as the

radio is turned on again.

Re-start following an interrup-

tion of the power supply

(coding system is activated)

• Turn on the radio.

The display shows “CODE”.

• Enter the code number given in the

Blaupunkt car radio passport and con-

firm (see example under “Switching on

security coding”).

The unit is now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt ACM 5450 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt ACM 5450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info